Jump to content

Holocause

Members
 View Profile  See their activity

  • Posts

    96

  • Joined

  • Last visited

 Content Type 

Everything posted by Holocause

  1. Holocause
    Thanks for the kind comments, glad you guys like it.
  2. Holocause
    Just wanted to share my Finished VF-1D in custom color scheme.
  3. Holocause
    Testors Florescent paint set
  4. Holocause
    An alternative to lightup kits is painting in florescent paint. You get some nifty effects. Here are some that I've worked on:
  5. Holocause
    Comes with the hobby really. Once you start getting seriously with the modeling, you'll come to realize that really, the cheapest part of the hobby is the kit itself.
  6. Holocause
    Just finished this Cutie
  7. Holocause
    I kinda liken it to Formula1... The bleeding edge automotive technologies are created in F1 racing which eventually make it to mass production cars later on. F1 being the gundams... and the Toyota Corolas being the GM's LOL
  8. Holocause
    Just finished building me a HGUC Sinanju
  9. Holocause
    Yeah I built a HGUC Unicorn Destroy mode a month back. I'd have to say its one of the more disappointing builds I've had in a while. The articulation and engineering is just poor compared to other kits and leads to really very limited poseability options. If your just after a straight out of the box build then its as straightforward as any other HG kit. If you're after detailing and fully painting out the kit, then there are problems galore. First off, the polycaps are RED!!! Then there are sharp angles everywhere with transparent red pieces in every limb that makes painting and panel lining a chore. Then there's the poorly designed arm joint. What irks me most about this kit is it seems BanDai almost forces you to buy both HG kits as each one has parts the other needs to get a complete set. Let me explain... the Destroy Mode is equipped with the Beam Magnum and extended shield... that's as far as weaponry this kit has... sure there are Four beam saber handles that come with this kit, but there are no BLADES, the blades are included in the normal mode kit. The Normal mode kit has 2 blades and beam handles, but it has no 'gun'. What it does have is a bazooka which has 2 modes. and this is the kit with the flayed extended palm hand while the destroy mode only has a gun and fist hand. It really seems that BanDai winged it on this design or it may be that they are holding out and know how popular this Unicorn Series will be and will have multiple variants of the base Unicorn design pushed out in the future. Really disappointed with the Unicorns seeing as the other Suits in the Unicorn Series all seem superbly designed. Now as for recommendations on HG Kits... I've recently been surprised at the quality of the 00 series of HG kits. Yeah sure the boxes leave something less to be desired (compared to the UC boxes), but the articulation on the 'Hero' Suits in this series are top notch. Simply having double-jointed knees has given this series a better standing on my 'to do list' of kits. And as mentioned by other posters, the 00 series of HG kits are relatively cheaper than similar caliber UC kits.
  10. Holocause
    Had fun with a Christmas Build... Real Grade ZakuII Char Custom Initial Assembly Panel Lining Decaling Final Assembly and Coating Micro Char More Photos
  11. Holocause
    Hi, this weekend (oct.08.10) is the New York Comic Con and Anime Festival. A friend of mine was good enough to get me a ticket to this thing and I'm kinda excited as I've never been to one of these things. I've been to other expo's and trade conventions before related to work and boring stuff but I've never been to a Comic Con which is something that may actually be fun. But again I've never been to one of these things so I don't know what to expect. Seeing as some of you here have actually been to some of these or even previous New York Con ones hopefully you can provide some insight. So my primary objective going into this thing is to grab as much stuff as I can from this thing. Any strategies on getting cool shwag? The ticket I got was for opening day on friday. It says that it won't open to the public until 1pm. So should I show up at the specified time, a little bit later or earlier? How's the shopping in one of these things? In general are things sold in these events cheaper or more expensive than retail and by how much on average? What would be a realistic budget to allocate coming into one of these things? $100 $200 $500? Is haggling accepted or should one just go for whatever sticker price they put on items they sell there (I have no idea if its gonna be a flea market environment there or not)? Stuff I'm interested in are Transformers, Gundams, McFarlane and of course Yammie Valks so would you think they would be in abundance there? And what's the deal with "exclusives"? I've looked at the website and there's like an NYCC 'exclusive' Gundam model, are these priced higher than what a regular variant be in this event? Are they worth their 'exclusivity'? Would appreciate the insight.
  12. Holocause
    Awaiting for the episode that pits no-name pilot of a UN Spacy CF VF1A vs no-name pilot of a Fedy Mass Production GM
  13. Holocause
    I too started out on a ver1 to test it out. With the ver1 though, not all the panel lines are deeply recessed so its a bit harder to keep all the lines in the straight and narrow, particularly with the sides of the backpack segment. Also the nose/cockpit segment of the ver1 is poorly molded and doesn't play nice with brush panel lining. But the ver1's are a good place to start to get your feet wet. If you've got old/broken toys lying around, use those to test out your paints and washes. Not all paints and washes are created equal so best to test it on something you have no sentimental attachment to first. Again best to use waterbased solutions as these will be the gentlest on the plastic components of your VF1's. I've had the misfortune on the past of having Gundams literally crumble on me when I used industrial paint thinners... never gonna do that again.
  14. Holocause
    1:48 Hiki VF-1A panel lined To get this desired result, I used a charcoal black acrylic paint. Watered down the paint to a smooth flowing consistency. Took a fine tip brush and applied the paint to the recessed panel lines. Its alright to overlap and I didn't have to be 100% accurate with the application, as long as I was able to fill the recesses. Let paint dry for 2-3 hours, go play some video games or watch a movie. Once paint is dry enough, I get a pack of cotton cue-tips and a water based floor polish. Dipped qtip on floor polish and begin to rub said tip onto excess paint on VF-1. Excess paint will immediately rub off keeping recessed panel lines intact with desired line marks. Rubbing does not have to be done vigurously. Just a few soft gentle swipes and the paint will peel away nicely. Dry-off and enjoy your masterpiece. The great thing with acrylics is that their water based and tend to be gentle with plastics, in that way, if you screw-up and a panel gets wiped away or you don't like how it turned out, simply re-do the process until you get your desired effect. I have to tell you though, this being my first 1:48, I was bouncing off the wall for a week deliberating whether to panel line this baby or not. I eventually manned up and just went for it. Was happy with the result.
  15. Holocause
    Thanks. I really enjoyed doing it.
  16. Holocause
    Just wanted to join the fray
  17. Holocause
    I haven't read pp14 onward of this thread so I dunno if what i say has been mentioned or been defunk'd but my theory is that that figure was a gravestone for Mao. Who's to say she didn't end up in that planet. From watching M:F and Ranka's flashbacks, when it was 'family time' they seemed to be in a calm planet when the Vajie's first appear, this is probably that planet. Unless I missed something and its Galia4.
  18. Holocause
    Watched it on youtube for lack of better alternative. Where's the photobook SDF:M style ending we were all hinted to on ep24?
  19. Holocause
    Neon Genesis E - KLAN - gelion Can we have a moment of silence for all the lost hippocows?
  20. Holocause
    Thank you guys for recommending aegisub. Couldn't wait any longer for Lunar specially since ep21 raw should be out in a few hours. Used the gg .ass of ep20 along with the 704x390 Shinsen raw.avi Had to do a bit of time shifting at the start and after the eye-catch but it was easy enough with aegisub. Bring on 21
  21. Holocause
    Its also sad that with Michael gone, there will be no further expounding on his sister's past. Its also a shame that their family line will end there with no one to pass the torch on to.
  22. Holocause
    When the spacefighting was ensuing and I saw Canaria's Monster starts extending its arms for conversion I was hoping we'd finally get a glimpse of battroid Konig... alas, denied.
  23. Holocause
    I generally like .mkv's as well. Its just a bummer they can't be played on an Xbox360 or a PS3. My gripe is that so far the only subbed release is in 1080 resolution and my workhorse PC can't handle it. Now my 360 can handle HiDef content better than my PC but alas it won't play .mkv. So I'm stuck right now waiting for a release in 704x400 or Lunar's avi. Oh I got my hands on gg's .ass file. Anyone know the timing to adjust the subs so it can match with the Zero-raw release?
  24. Holocause
    Next episode's title "Goodbye Sister" does not bode well Yeah I too am down on this episode. No fun fighting the Vaggies if they have no fight in them. Funny seeing the Vaggie-Ka-Bob at the start of the ep with Alto and a CFVF.
  25. Holocause
    Hooray for Klan-klan micronization animation sequence... them Klan-Klans are HUGE More blade action courtesy of Alto is always good. But yet again Alto's VF makes a visit to the repair bay... man how much does he owe SMS by now? Those poopoo-ing Brera's skills are a bit critical. It was a 3 vs 1 fight. And its not like the 3 he was up against were CF material. Imagine if Brera had 2 more of his 27 buddies to back him up. The fact that he went up against 3 fighters, suffered minor damage and still manage to complete his mission and play the harmonica says something for him. Mmmm a Mac0 remake... would pay tickets to see that movie DYRL style ... could a VF-0/ SV-51 make an appearance? we can only wish. I kinda liked how the VF-25 translated motion into expression.
×
×
  • Create New...