Jump to content

tekering's BItComp entry #1 - Gnerl resin kit


tekering

Recommended Posts

I was showing my work to one of the junior members of our local modeling group, and he asked a question that surprised me.  He wanted to know how I managed to draw such clean and straight lines on spherical surfaces, like the Gnerl booster rockets.  I felt a little condescending, demonstrating what I thought was an obvious technique, but the approach apparently hadn't occurred to him...

clarification.thumb.jpg.d4a7c99203f3e3b073d0586fb2d5616d.jpg

...so perhaps an amateur reading this may also find it enlightening.

demonstration.thumb.jpg.abad85c592dd9be21aae09c817dc17a0.jpg

Hold your marker steady, and rotate the circular piece in a slow, steady fashion, so that the felt tip makes contact at an equal height around the circumference of the piece.  It's best to go lightly, and make several passes to ensure the ink is evenly distributed, resulting in a clean line of consistent thickness.

results.thumb.jpg.692e302df8d10564d8fb690829be8cba.jpg

My apologies to those of you who find this blindingly obvious.  :p

10 hours ago, Chronocidal said:

I would absolutely go for something like a lens over the blue camera sensor.

Let's check the ol' parts bin, shall we?  

H-eyes.thumb.jpg.4e3cf1ee96e8fb0c17ba49514b546f5f.jpg

One of these should do nicely.

879685848_Wavelens.thumb.jpg.f9e62c45854b4cf683ed87a7f0043701.jpg

It's difficult to photograph, but it definitely catches the light like glass now.  :good:

Link to comment
Share on other sites

Very cool technique on the lines, and the glass sensor looks great.

 

I have a questions for you @tekering.  Masking curves/circles and complex shapes.....how is the best way to do it?  I purchased some of Tamiya "Masking Tape For Curves" whish is somewhat stretchy, it's a vinyl tape. I used if for Woody's dark brown hat ring, it was better, but still not perfect. Any suggestions? Feel free to PM me. Don't wanna bog down your build thread.

Link to comment
Share on other sites

9 hours ago, derex3592 said:

Masking curves/circles and complex shapes.....how is the best way to do it?  I purchased some of Tamiya "Masking Tape For Curves" whish is somewhat stretchy, it's a vinyl tape.

It's great stuff, and it's helped me out a great deal on this build.

1921090114_maskingtape.thumb.jpg.902957cf62732789df162ed61659be23.jpg

As it stretches, however, it's less likely to adhere to the surface as well as conventional masking tape, so I recommend using both in tandem.  I apply the special vinyl stuff first, where the curves are sharpest, and then cover it with regular masking tape as much as possible.  This will help hold the white tape in place, and ensure a good seal when painting over it.

470906317_mixedmasking.thumb.jpg.bb38c1fa13dfa318d15d6f116107c1ea.jpg

For straight lines, conventional masking tape is sufficient.

1087521116_paintingthehull1.thumb.jpg.516efbdc724ae96d0ab8703d525cb618.jpg

On the left, you can see that I started by spraying another layer of the primary color (green) over the masking, which will help seal the edges and prevent color bleeding when the next color is applied.  This prevents any paint from seeping under the tape.

A couple light base coats of black surfacer followed.  Patience is key here; if you attempt complete coverage with a single coat, you might lay down too much paint and get it under the masking.  Again, to avoid color bleeding, spray at a safe distance from the surface, and give the paint a chance to dry before spraying the next pass.  

I then laid down another layer of masking tape, using the sculpted rivets as a guide to determine where the hypothetical panel separation might be.  A thin coat of slate grey was applied to the exposed upper portion of the hull.

1520426458_paintingthehull2.thumb.jpg.d9340baaf45aa5259d7e71ef190fb16d.jpg

Once that had dried, I removed the top layer of masking tape, exposing the rest of the hull portion I wanted to paint.  I then masked over the upper portion I'd already painted, carefully following the panel line I'd created with the previous mask, and repeated the process for the center portion.  After that section had dried, the process was repeated once again for the lower portion of the hull.  The result is three different sections with subtly different shading and coverage, giving the impression of separate parts that had been welded together.  ^_^

9 hours ago, derex3592 said:

Any suggestions? Feel free to PM me. Don't wanna bog down your build thread.

Not at all, man.  I want these threads to benefit everybody, so I've put a lot of time and effort into sharing my techniques and making suggestions to my fellow model makers.  The more we learn from each other, the better we all become... and the more awesome resin kits get built and displayed.  :D

Link to comment
Share on other sites

So, any self-respecting modeler should have a selection of these in their arsenal:

arsenal.thumb.jpg.44d6714878c7151561fe79b23ebb5fd8.jpg

They're extremely useful for reinforcing tenuous or fragile connection points on thin parts, like the Gnerl's distinctive airbrakes.

516649852_drillingthinholes.thumb.jpg.f2179d58af397671f3307254393c5e6e.jpg

I start by drilling a 0.8mm hole into the base of each airbrake...

1539891405_drillingholes.thumb.jpg.99998a455b4a32954f5f54bd5eef58ff.jpg

...and corresponding holes into the engine housings, just below where the rocket boosters will attach.

1351855298_mountingpoints.thumb.jpg.d999cede1fd647697b0196503f8e5526.jpg

Metal wires of matching thickness are carefully fitted into the holes, so they'll protrude between the fuselage and the boosters.

861074337_readyforattachment.thumb.jpg.a94cdaa086efd002580176edbe333678.jpg

Once the holes are lined up and the airbrakes are connected, the angle of attachment can be adjusted as the glue dries.

attached via wire.jpg

With metal wires reinforcing the structural integrity of the attachment points, I don't need to worry about accidentally snapping one of the airbrakes off...

1704201500_Gnerlrearthrusters.thumb.jpg.d07b4750ba01086fd4582cf59d246b93.jpg

...at least, not as much as I would have to otherwise.  ;)

Edited by tekering
Link to comment
Share on other sites

9 hours ago, nightmareB4macross said:

Will you be adding more detail to the exhaust side of the thruster bells?

They do look a bit dull and mismatched when compared to all your wonderful work.

Well, that's because the electronics hadn't been installed yet.  :p

785886341_Gnerlthrusterslitinprofile.thumb.jpg.bec0952c5b97948748064058829a5f8e.jpg

The LEDs aren't quite as bright as I'd hoped, but I love the reflections visible in ambient light.

583196524_Gnerlthrusterslit.thumb.jpg.b67708a87aec1e1b41f51a1a17e70ece.jpg

Now, there's one more substantial modification to be made before I can call this kit finished, and that's to add maneuvering thrusters to the sides:

882657633_Gnerlquarterunderside.jpg.830039321a9476bbfa0e549c313496b7.jpg

172148584_Gnerlthree-quartersfore.thumb.jpg.94871a7e12dcc1ea279f6ef7f1479019.jpg

The line art is a little vague and inconsistent with the details, but the animation makes their purpose and function extremely clear.

420476349_Gnerlmaneuveringthrusters.thumb.jpg.b11e3084fa0b3523c4d569323dddd11e.jpg

There's simply no way this fighter could possibly fly in an atmosphere without them, given the lack of wings... or even function in space, for that matter.

And yet, Moscato's kit seems to have replaced them with... shallow, concentric circles...?  :huh:

1859859246_GnerlMTbefore.thumb.jpg.8ce75fb7b8caa0b01c0ba06e8af44caa.jpg

I'm not even sure what they're supposed to represent, but they they sure don't look like they're supposed to.

121948821_lackofforethought.thumb.jpg.a136ad9bb48da71d4167373464a5b57a.jpg

I really should've decided what to do about it before painting the hull, however.  My Dremel made a terrible mess.  :(

1659629791_thrusterholes.thumb.jpg.b8e96815956f8e95aeaf533f16179b86.jpg

Eventually, I ended up with two holes on either side to fill.

791227449_verniernozzles.thumb.jpg.18a4802c6d3642ec7e28baa26259b31f.jpg

Kotobukiya and Wave both have options for vernier nozzle upgrade kits, but neither was ideal; the Wave parts had thin, curved edges, and the Kotobukiya nozzles were too narrow and deep.

1939451705_stockverniers.thumb.jpg.0e9174f9ba3209c36298e9d257cb81d5.jpg

However, by cutting the edges off the Kotobukiya parts and sanding down the Wave parts to fit them, I made four identical verniers with the right size, shape and depth to fit the look of the Gnerl's maneuvering thrusters.

1418042933_kitbashedverniers.thumb.jpg.bb8b1263f76fbf82571e7390a73dcebc.jpg

A hell of an improvement, if I do say so myself!  ^_^

901209205_GnerlMTafter.thumb.jpg.8599cf0cfdfb462c24cabb72869509ec.jpg

Link to comment
Share on other sites

9 hours ago, derex3592 said:

Love the thruster add on. Did those not interfere inside the cockpit?  It looks like they were under the seat area maybe?

The front ones enter the cockpit on either side of the seat, where there's just enough space behind the pilot.  It's impossible to photograph at this stage, but I'll try to illustrate their placement:

illustration.thumb.jpg.cdae70de61cfa5167b306ef185141005.jpg

They end up behind the pilot's elbows, see.

178329673_illustrationwithpilot.thumb.jpg.e1059ba1abe37d6a2be66f17c9efa425.jpg

3 hours ago, Gabe Q said:

A little bit of extra effort goes a long way!

Given all the extra effort I've put into photographing and documenting this build, I'm hoping the contest will be judged on that basis!  :p

Scratchbuilding covers for the landing gear housings took a bit of extra effort, too...

scratchbuilt.thumb.jpg.c361fd8fc179c342103cc02661db1767.jpg

Since the landing legs are removable, I needed optional parts that made it look like the landing gear had been retracted into the hull.

magnet.thumb.jpg.782d38813662539329a9539728c76912.jpg

They attach with little magnets.

1425618763_paintedtomatch.thumb.jpg.aacff429b9eb3b7764125c1985c910d4.jpg

I then painted the covers to match.

1635157633_Gnerlflyinginprofile.thumb.jpg.88d019dfed26c72dc94a541327ba29a0.jpg 

Now I'm able to display the Gnerl in flight as well.  ^_^

Link to comment
Share on other sites

5 hours ago, Return To Kit Form said:

I/m not sure how you type out a whistling sound - because that is the sound I made when I saw the finished kit. Great work Ted!

- Brett

<iframe src="https://giphy.com/embed/jK3DYSFi3S3Li" width="480" height="245" frameBorder="0" class="giphy-embed" allowFullScreen></iframe><p><a href="https://giphy.com/gifs/off-some-this-is-so-stupid-jK3DYSFi3S3Li">via GIPHY</a></p>

Guess I suck at that too.

Edited by Mazinger
Link to comment
Share on other sites

1 hour ago, Knight26 said:

Freaking gorgeous, hope you win.

Well, now that the contest deadline's been extended, I'm sure the competition will get more intense...  :aggressive:

head-on.thumb.jpg.b1fa207f090ecf7ec80818841971899a.jpg

I'll continue posting pics in the meantime.  B))

Link to comment
Share on other sites

On 10/30/2019 at 2:35 AM, tekering said:

Well, that's because the electronics hadn't been installed yet.  :p

785886341_Gnerlthrusterslitinprofile.thumb.jpg.bec0952c5b97948748064058829a5f8e.jpg

 

901209205_GnerlMTafter.thumb.jpg.8599cf0cfdfb462c24cabb72869509ec.jpg

Great Mods Ted! Which LEDs did you use? The look like little self contained ones? And we ever issue a V.2 of this kit I'll shamelessly steal your vernier thruster idea for the side panels. They look great!

Oh and do the missile doors still open?

 

Cheers,

- Brett

Edited by Return To Kit Form
Link to comment
Share on other sites

  • 4 weeks later...
On 11/1/2019 at 2:25 AM, Podtastic said:

If the cockpit can still open it would be great to have shots of the completed parked/flying Gnerl with views of the pilot.

Well, the canopy wouldn't be off while the ship's in flight, of course...  :p

1900813910_exposedpilot.thumb.jpg.160c4aada8dc163b49e639a5a9dd0ab7.jpg

On 11/1/2019 at 6:21 PM, Return To Kit Form said:

Oh and do the missile doors still open?

Naturally.  ^_^

886653642_missilesexposed.jpg.e5f7c6756aee96015efad81a41ba785a.jpg

1867736045_undersidemissilesclose-up.thumb.jpg.4616110f8ad748a503a61754bec2eeb1.jpg

On 11/1/2019 at 6:21 PM, Return To Kit Form said:

Which LEDs did you use? The look like little self contained ones?

That's right.  They're from X-Base.

57097bf2e6257fe2967862c24c4e9b72_origina

Apparently, they're even waterproof!  :o

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...