Jump to content

Recommended Posts

Just now, Reïvaj said:

No, it wasn't included in my question for I don't quite like its battroid mode, but I agree with you its colour scheme is just gorgeous...

For me, the 31A fixes most of the glaring deficiencies with the YF-30, the biggest being the nonsense tail mounts.  Sadly, the 31 series ditched the streamlined weapons pod mount and sensible landing gear, both of which will never fail to bug me something awful. :p 

I would gladly eat up a pile of 31As in the YF-30 scheme though.

Edited by Chronocidal
Link to comment
Share on other sites

2 hours ago, Grey728 said:

Does the VF-30 Chronos count? I think it shares the same mold as the VF-31 (replacing the back laser for... something else) and wing extension of a 31A. And that color scheme.. damn...

The YF-30 is an entirely different mold.  It shares 95% of the same transformation as the VF-31 but they aren’t the same at all.

Link to comment
Share on other sites

3 minutes ago, Darth Mingus said:

The 31E is still available for pre-order in the big chain stores in Japan like Bic Camera and Yodabashi. probably NY has some on reserve at these locations, which explains the prepaid and markup.

I checked those sites shortly after PO and they say reservations closed. Do you have to go to a store to place a PO?

Link to comment
Share on other sites

38 minutes ago, Numbninja said:

Why could they release more 31a...i could cancel my order of chuck and prob get it for cheaper afterwards...sigh

If you cancel Chuck and get the Karios now, there's no guarantee that you can get Chuck's 31e later at a cheaper price.

Most likely that Chuck's will increase later on due to uniqueness of a foldable randome and hidden in valk mode while the other RVF valks have it exposed. 

It's a gamble that we all take.. Get it now while you can afford it, or get reemed and pay at a crazy price later on. If the price drops and you have the valk at hand, concider yourself thankful and not scrambling at the at last minute when you missed the opportunity. 

Link to comment
Share on other sites

16 hours ago, seti88 said:

Does anyone have any pictures of a VF-31 + supers (and without wing boosters) + lil drakens attached to the end wings, in fighter mode?

I took a few in fighter mode.  Doesn’t look radically different.  I didn't have the clip available to put the reaction warheads on though.

63B79396-0B33-4729-BEFF-1A87171EE915.thumb.jpeg.91da325b9055f8686b91a6fa7d33fdac.jpeg76A7DEE0-687D-4166-A3FB-C98A72EECC34.thumb.jpeg.226fe854263e6bd8900846550dd30126.jpeg5F37CF87-4F09-4B8A-8819-182869DF09A1.thumb.jpeg.b554fd585b74453f0a92208eb7f0689a.jpeg8235ECE9-687C-4EA8-A60F-0FD7C7DCC752.thumb.jpeg.92663363c29041f5c73e831b3f8440d4.jpeg

 

Edited by Mommar
Link to comment
Share on other sites

Has anyone tried to disassemble a DX VF-31 before? Is it even possible to do so? It looks like the entire thing is glued together rather than the good old fashion screws. I'm trying to disassemble the nose section but couldn't find a single screw!

Edited by Firefox
Link to comment
Share on other sites

3 hours ago, borgified said:

If you cancel Chuck and get the Karios now, there's no guarantee that you can get Chuck's 31e later at a cheaper price.

Most likely that Chuck's will increase later on due to uniqueness of a foldable randome and hidden in valk mode while the other RVF valks have it exposed. 

It's a gamble that we all take.. Get it now while you can afford it, or get reemed and pay at a crazy price later on. If the price drops and you have the valk at hand, concider yourself thankful and not scrambling at the at last minute when you missed the opportunity. 

yea...i didn't take that into consideration...i was kinda going with the fact that 31j  can be found below msrp...the foldable randome will impact it somewhat.

but the demand for kairos is so high, it doesn't make sense tho

Link to comment
Share on other sites

2 hours ago, Firefox said:

Has anyone tried to disassemble a DX VF-31 before? Is it even possible to do so? It looks like the entire thing is glued together rather than the good old fashion screws. I'm trying to disassemble the nose section but couldn't find a single screw!

I have. It's pretty much impossible to take apart more than a few sections without breaking it.

Everything is either superglued together, or screwed in and then superglued over. Bandai really doesn't want you f***ing around with the insides of their toys.

Link to comment
Share on other sites

1 hour ago, Numbninja said:

yea...i didn't take that into consideration...i was kinda going with the fact that 31j  can be found below msrp...the foldable randome will impact it somewhat.

but the demand for kairos is so high, it doesn't make sense tho

The karios had a military like scheme and for some reason a supply of it was unusually reduced even though it was a TWE item and there should have been enough of them for everyone, orders were cancelled or delayed and there was a mad scramble after that

Link to comment
Share on other sites

12 hours ago, Lolicon said:

I have. It's pretty much impossible to take apart more than a few sections without breaking it.

Everything is either superglued together, or screwed in and then superglued over. Bandai really doesn't want you f***ing around with the insides of their toys.

It's probably because they know if you open up anything they designed, you're going to be assaulted by a barrage of tiny plastic inserts filling all the internal gaps, get one of them lodged in your eye, and sue them for hazardous toy design. :p  (Seriously.  If you ever work one of Bandai's valks open, put down a drop cloth, and consider safety glasses.  The parts go everywhere.)

Link to comment
Share on other sites

2 minutes ago, Chronocidal said:

It's probably because they know if you open up anything they designed, you're going to be assaulted by a barrage of tiny plastic inserts filling all the internal gaps, get one of them lodged in your eye, and sue them for hazardous toy design. :p  (Seriously.  If you ever work one of Bandai's valks open, put down a drop cloth, and consider safety glasses.  The parts go everywhere.)

Isn't easier to take apart a valk inside a photo tent if you have one (that is)? Plus another tip.. Never a carpet floor either as you're going to be looking for days if a part goes flying and it's buried within the carpet weaves.

Link to comment
Share on other sites

19 hours ago, Mommar said:

I took a few in fighter mode.  Doesn’t look radically different.  I didn't have the clip available to put the reaction warheads on though.

63B79396-0B33-4729-BEFF-1A87171EE915.thumb.jpeg.91da325b9055f8686b91a6fa7d33fdac.jpeg76A7DEE0-687D-4166-A3FB-C98A72EECC34.thumb.jpeg.226fe854263e6bd8900846550dd30126.jpeg5F37CF87-4F09-4B8A-8819-182869DF09A1.thumb.jpeg.b554fd585b74453f0a92208eb7f0689a.jpeg8235ECE9-687C-4EA8-A60F-0FD7C7DCC752.thumb.jpeg.92663363c29041f5c73e831b3f8440d4.jpeg

 

Thanks for the pics mommar! On first glance yeah not that much of a difference. 

Looking at it longer tho, I think the bulkiness matches the lil drakens well. With added reaction missiles or the 19 missiles, this would definitely look fully decked out.

Might bite on any 3D printed clips, since I already have the lil drakens..

Link to comment
Share on other sites

2 hours ago, Firefox said:

I'm doing some mod on the 31J. Some parts has so much glue that the parts are fused together as one. I guess glue is cheaper than screw.

The DX is more like a toughened model than toy 

It’s kind of the best of both worlds..

As long as it’s not broke and don’t need fixin..

Edited by Bolt
Link to comment
Share on other sites

On 2/13/2019 at 3:40 PM, mcfly50 said:

I’ve ordered other stuff from here and never had an issue. Never valks though. 

https://www.play-asia.com/dx-chogokin-macross-delta-vf-31e-siegfried-chuck-mustang-custom/13/70cjjd

I had placed a pre-order for Chuck and they charged my PayPal immediately.  They informed me that when paying with pay pal they take payment upfront.  I was able to get a refund but I'm debating whether to throw a cc on there as I've heard PA likes to over sell POs.  

Not sure how long I have before they cancel the order but seeing they still have it open on the site I'm inclined to let it cancel.  I have a feeling they aren't going to be able to fill all the orders when everyone else had closed POs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...