Jump to content

Recommended Posts

This is the final project video.

Hi Ya'll,

I got a new motorized custom planned here which I thought you might find interesting.

I will tell you right up front that I had to get a lot of advice from MechTech to plan for this custom, and I thought that his feedback may help with builds you have always wanted to motorize yourselves.
.
The initial idea was to build and paint one of my all-time-favs, the Super Space Battleship Neo-Nautilus. I was planning to just add some nice UV and flashing LEDs, and maybe even add some sound ("Don't forget to try in mind...").

post-18429-0-07439300-1436755626_thumb.jpg

This kit has a nice feature, because if you turn the tail engine, the two sets of wings open and close, as well as the tail fin detracting. Jump to 1:35 of this video to see the wing system working.

However, my simple plan changed when I saw the internal parts on the web.

 

It seemed to me that maybe the Nautilus could be automated to open/close with an electric motor.

post-18429-0-27162100-1436755758_thumb.jpg
post-18429-0-80830300-1436755753_thumb.jpg
post-18429-0-71871100-1436755755_thumb.jpg

The Problem:

But how was I to get this sucker motorized? I have no electric experience more than lighting up an LED for my kits. I have never played with motors, trains, or R/C. And I am, in general, technically challenged.

So can it be done? That's when I reached out to MechTech to see if it was possible, and began a journey of electric enlightenment. As a result of my research, the following is my current work plan to motorize the Nautilus.

Step 1: The Motor

To make this baby move, we need a motor which will replace the ship's internal "male threaded styrene rod" in the image above.

post-18429-0-97072000-1436755760.jpg post-18429-0-04662500-1436762166_thumb.jpg

This image above is a micro (N20 sized) DC 3-6V motor. A 4mm nut is screwed on the motor's male threaded rod, and then glued to the female threaded styrene part of the model. The female part is actually the only moving part, which retracts all the wings.

The first 15 sec of this video demonstrates what will happen mechanically with a "Ball Screw Driven Machine".

The key to understanding this mechanical process, which took me a maddening while to figure out, is that the nut doesn't revolve around the threaded rod, it just glides along, moving the part it is glued to.

Step 2: The Switch

As may have occurred to you, the motor only goes in one direction, so how do you make it reverse direction? And how do you slow it down to a reasonable speed?

Apparently, the way to do this is to reverse the polarity of the motor so it will turn in reverse.
To do that, first I need a DPDT rocker switch with forward, off and reverse positions.

post-18429-0-97449000-1436755750_thumb.jpg

But, I also need to wire the DPDT switch in a particular way to cause the motor to reverse direction, as shown in this diagram.

post-18429-0-96901100-1436755763_thumb.gif

I actually found some good videos on how to wire this diagram, and it is easier than it seems. You can also buy pre-wired "Forward-Off-Reverse" DPDT switches.

To slow down the motor, you can get the motor in the RPM (rounds per minute) that you need. I am planning to test this at 150 RPM at 6V, and if needed, I will reduce to 3V in order to get half the RPM. I am a bit concerned if this will still be too fast. But I found you can also get motors as low as 30 RPM. (Motorized Battleship Yamato gun turrets, anyone?)

Step 3: The Limit Switch

After getting this wired up, I also need what are called "Limit Switches" to prevent the motor from running along and tearing apart my model.

A limit switch will automatically cut off the power to the circuit when it is physically triggered. As you see in the image below, the limit switch has a lever which triggers it. So I need to set up two limit switches, one at each end of the moving plastic female threaded part of the model. When the moving female plastic part physically hits the limit switch's lever at each end, it stops the motor before it crashes everything. (Guld should not have removed his limiters. Just look what happened.)

post-18429-0-92530400-1436758689_thumb.jpg

This video shows how a limit switch works with an LED and seems to be an easy job.

To prevent complete disaster, we need to wire in these switches to our existing forward-off-reverse switch. This diagram shows how the two limit switches are wired into to a DPDT "relay circuit". It is not exactly the same as our circuit diagram above, but it will do the trick. I do have a bit of concern about wiring in these switches, but I think trial-and-error will do it.

post-18429-0-49985800-1436758860.gif


Step 4: Await Parts and Practice Soldering

So with all of this new motorized enlightenment courtesy of MechTech, I am assembling all the necessary parts to begin testing the motor. I will not even touch the model until I feel that the motor speed and limit switches are working perfectly. If things proceed smoothly, I might also try figure out how to make this baby remote controlled (which BTW I also have no clue about what so ever).

I will update as I proceed testing. Any advice on improving this plan would be greatly appreciated.

I would also love to hear about your ideas for projects you might want to motorize.

Edited by arbit
Update
Link to comment
Share on other sites

This is awesome, best of luck to you.

As a follow up, might I suggest a motorized Exelion, with a Gunbuster that emerged from the top, while playing the drum driven Gunbuster fanfare. :)

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...

Those are amazing links. Wow.

But that is obviously someone with professional skills.

I am still trying to get the basics of electric wiring down.

Edited by arbit
Link to comment
Share on other sites

Except I wouldnt know how to build a vinyl kit to a good level.

Is that the mythical General Products Excellion?

I have seen cool scratch builds.

But I settled on the Kotobukiya Coin Excellion figure. Very nice finish for a trading figure.

Link to comment
Share on other sites

Except I wouldnt know how to build a vinyl kit to a good level.

Is that the mythical General Products Excellion?

I have seen cool scratch builds.

But I settled on the Kotobukiya Coin Excellion figure. Very nice finish for a trading figure.

Yep, it's the General Products resin kit (not vinyl). It took me something like 10 years to find it.

And yes, the Kotobukiya excelion is really good! Too small for any crazy mods, tho.

Link to comment
Share on other sites

Yep, it's the General Products resin kit (not vinyl). It took me something like 10 years to find it.

And yes, the Kotobukiya excelion is really good! Too small for any crazy mods, tho.

Yes I meant resin.

I think I heard you mentioned it on the Macross Podcast on scale models as one of your grail items that you found.

That was you right? Amazing podcast!!!!

Edited by arbit
Link to comment
Share on other sites

Yes I meant resin.

I think I heard you mentioned it on the Macross Podcast on scale models as one of your grail items that you found.

That was you right? Amazing podcast!!!!

Yes, the Speaker Podcast crew were nice enough to have me on the podcast when I was visiting Japan for Wonderfest last year. They're a great bunch of guys!

Link to comment
Share on other sites

Yes, the Speaker Podcast crew were nice enough to have me on the podcast when I was visiting Japan for Wonderfest last year. They're a great bunch of guys!

I loved that podcast. Most Macross World Podcasts are just amazing.

But the two on the history of scale models were exceptionally great.

I had always been lost in terms of all the macross models out there, so it was really helpful to make heads or tails of them all and to know where to start.

Link to comment
Share on other sites

  • 2 months later...
On 8/28/2015 at 1:00 AM, wmkjr said:

Cool project. Any updates?

Found some other ones out there:

https://www.youtube.com/watch?v=IAxoW6mMRpM

https://www.youtube.com/watch?v=cogyNGVP0uk

Thanks. Here is an update on the test wiring of the motor was successful, so now I can start with the actual build :)

Of course there are other amazing builds out there, but my idea is to share all the details for others just starting out on electric wiring.

I do have to say that while its fun to wire and light up your toys, the biggest challenge is waiting for parts to arrive in the mail!

Props to MechTech for his support.

Edited by arbit
Link to comment
Share on other sites

  • 1 month later...

Project update.

Okay, moving along in my electric wiring education, I've learned a few more bits and pieces to make this work.

First of all, I decided to get a breadboard which makes testing the wiring and electric battery usage a lot easier than what I did in the embedded video above.

I think my plan is to have the Leds and motor on one external power source, which is why I need the breadboard to figure out my power requirements.

I am also planning a remote control for the LEDs with this cool gadget, however, I really wish I could have a remote control for the DPDT swith for the motor as well, but i have not figured that out yet.

Any advice appreciated.

 

 

Edited by arbit
Link to comment
Share on other sites

  • 1 year later...

If you look carefully in that first video link (By DorobouHige) at the 1:11 mark you can see that he is using what looks to be a 60rpm motor. thought you might want to take that into account before you start testing with 150 rpm.

Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...
2 hours ago, wmkjr said:

Awesome job on your project! Wow it's been about 2 years since I first started to follow this project!

Thanks. You could say it was 1.5 years of learning and planning, and half a year of work.

Link to comment
Share on other sites

On 7/23/2017 at 1:31 PM, arbit said:

Thanks, but in fact I am a total noob and figuring things out as I go.

If it wasnt for youtube tutorials, I couldnt do a thing.

Well for a total noob your results are very impressive, the paint job came out great. :D

Link to comment
Share on other sites

17 hours ago, 505thAirborne said:

Well for a total noob your results are very impressive, the paint job came out great. :D

Thanks. I hate painting. Its a nightmare. Actually I had to paint it twice because I had flash in my gloss coat the first time. Fortunately I installed most of the electronics after painting.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...