beatsing Posted May 3, 2019 Share Posted May 3, 2019 15 hours ago, gerwookie said: Sorry I see now what you mean by rotates. And it's on both feet I believe. Hope these pictures can help better than I describe. Yeah, this is exactly the same problem on mine and on the previous Ostrich release. The left foot can do a 90 degree rear heel (it is perpendicular to the rear calf) while the front foot can go flush straight with the front shin. The right foot can only go as far as your photos. If you find my old posts on the HMR Ostrich, you'll see the comparison, it's about a 45 degree difference. The other valks in the HMR line don't seem to have this problem. I've used steady force, like on the stiff neck of the VF1D, and also heat from blow dryer and also the water which usually works on stiff joints but it didn't work on both the VF1D or the Ostrich right feet. I think the right legs are the same and have the same flaw. Quote Link to comment Share on other sites More sharing options...
slide Posted May 3, 2019 Share Posted May 3, 2019 1 of my 3 VF-1D's has the foot issue... both of my VT-1's have it. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 3, 2019 Share Posted May 3, 2019 (edited) OK SH9000, I am ready whenever you are [vf-4] Is the Tamashii act 5 stand, the correct stand for HMR? [thanks in advance MW] https://www.amazon.com/dp/B003F256QI/?coliid=I2TNJDXPL862N6&colid=283SUKBYOXOHV&psc=0&ref_=lv_ov_lig_dp_it Or this? https://www.amazon.com/dp/B00WV067XQ/ref=dp_cerb_1 Edited May 3, 2019 by vlenhoff Quote Link to comment Share on other sites More sharing options...
Shizuka the Cat Posted May 3, 2019 Share Posted May 3, 2019 17 minutes ago, vlenhoff said: OK SH9000, I am ready whenever you are [vf-4] Is the Tamashii act 5 stand, the correct stand for HMR? [thanks in advance MW] https://www.amazon.com/dp/B003F256QI/?coliid=I2TNJDXPL862N6&colid=283SUKBYOXOHV&psc=0&ref_=lv_ov_lig_dp_it Or this? https://www.amazon.com/dp/B00WV067XQ/ref=dp_cerb_1 Tamashii Act 5 stand is correct. Quote Link to comment Share on other sites More sharing options...
HardlyNever Posted May 3, 2019 Share Posted May 3, 2019 (edited) 21 minutes ago, vlenhoff said: OK SH9000, I am ready whenever you are [vf-4] Is the Tamashii act 5 stand, the correct stand for HMR? [thanks in advance MW] https://www.amazon.com/dp/B003F256QI/?coliid=I2TNJDXPL862N6&colid=283SUKBYOXOHV&psc=0&ref_=lv_ov_lig_dp_it Or this? https://www.amazon.com/dp/B00WV067XQ/ref=dp_cerb_1 Either of those would work. If you don't care about the color of the base that much, the second link is a better value. The first link is the stand that some HMR toys come with (like the Regults). Most HMR toys come with adapters specific to that toy that will attach the toy to the display arm a lot better than the claw thing does, so you don't really need that. The support arm on the first link is a little beefier, if you're worried about weight, though. Edited May 3, 2019 by HardlyNever Quote Link to comment Share on other sites More sharing options...
MKT Posted May 3, 2019 Share Posted May 3, 2019 24 minutes ago, vlenhoff said: OK SH9000, I am ready whenever you are [vf-4] Is the Tamashii act 5 stand, the correct stand for HMR? [thanks in advance MW] https://www.amazon.com/dp/B003F256QI/?coliid=I2TNJDXPL862N6&colid=283SUKBYOXOHV&psc=0&ref_=lv_ov_lig_dp_it Or this? https://www.amazon.com/dp/B00WV067XQ/ref=dp_cerb_1 Just in case you missed it, the HMR VF-4 already comes with a stand. Quote Link to comment Share on other sites More sharing options...
Shizuka the Cat Posted May 3, 2019 Share Posted May 3, 2019 4 minutes ago, MKT said: Just in case you missed it, the HMR VF-4 already comes with a stand. It comes with the stand and thick primary arm, but does not include the thinner secondary arm. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 3, 2019 Share Posted May 3, 2019 I’ll let you know when they come in @vlenhoff. Quote Link to comment Share on other sites More sharing options...
DewPoint Posted May 3, 2019 Share Posted May 3, 2019 The stand that is most commonly included with Hi-Metal R toys is the TAMASHII STAGE ACT.5 for Mechanics. Three stands are included in this set. It may have been reduced to two on later releases. Check before you buy. Other options include TAMASHII STAGE ACT TRIDENT clear or TAMASHII STAGE ACT TRIDENT PLUS (clear). Also consider Tamashii Effect Explosion. I've seen them listed as "Red", "Grey", "Pink" or "Brown". Beware of inflated prices! Quote Link to comment Share on other sites More sharing options...
ScrambledValkyrie Posted May 3, 2019 Share Posted May 3, 2019 3 hours ago, Shizuka the Cat said: It comes with the stand and thick primary arm, but does not include the thinner secondary arm. I’d personally be nervous about mounting a fighter-mode valkyrie using one of the tube extensions. I’ve done it, but not for long. It’s not sturdy enough in my opinion. Battroid’s another matter, since the mass is distributed differently. Quote Link to comment Share on other sites More sharing options...
Duymon Posted May 3, 2019 Share Posted May 3, 2019 I've had my original Hi-Metal Skull squadron decked in supers in fighter mode and displayed from a trident stand for about 2 years. The thin plastics hold up pretty well, just need to make sure you tighten the small joints, but not to the point that they crack over time. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 4, 2019 Share Posted May 4, 2019 7 hours ago, Shizuka the Cat said: Tamashii Act 5 stand is correct. Thanks Shizuka! 7 hours ago, HardlyNever said: Either of those would work. If you don't care about the color of the base that much, the second link is a better value. The first link is the stand that some HMR toys come with (like the Regults). Most HMR toys come with adapters specific to that toy that will attach the toy to the display arm a lot better than the claw thing does, so you don't really need that. The support arm on the first link is a little beefier, if you're worried about weight, though. Good to know, i may stick to the clear ones, for now, but it is good to know thanks Hardlynever! 7 hours ago, MKT said: Just in case you missed it, the HMR VF-4 already comes with a stand. You cam call me : Sir Miss A Lot. If it wasn't for you guys, i would... miss... a lot... Thanks MKT! 7 hours ago, Shizuka the Cat said: It comes with the stand and thick primary arm, but does not include the thinner secondary arm. Good to know, thanks! 6 hours ago, sh9000 said: I’ll let you know when they come in @vlenhoff. Oh no rush at all SH9000, i am always grateful for you kindness. 4 hours ago, DewPoint said: The stand that is most commonly included with Hi-Metal R toys is the TAMASHII STAGE ACT.5 for Mechanics. Three stands are included in this set. It may have been reduced to two on later releases. Check before you buy. Other options include TAMASHII STAGE ACT TRIDENT clear or TAMASHII STAGE ACT TRIDENT PLUS (clear). Also consider Tamashii Effect Explosion. I've seen them listed as "Red", "Grey", "Pink" or "Brown". Beware of inflated prices! Thats really cool , thanks for the info and links Dewpoint. 3 hours ago, ScrambledValkyrie said: I’d personally be nervous about mounting a fighter-mode valkyrie using one of the tube extensions. I’ve done it, but not for long. It’s not sturdy enough in my opinion. Battroid’s another matter, since the mass is distributed differently. Hmmmm, that sounds fragile, but luckily the HMR are so light, i am not very worried for them "breaking" a bad fall. Thanks ScrambledValkyrie! 3 hours ago, Duymon said: I've had my original Hi-Metal Skull squadron decked in supers in fighter mode and displayed from a trident stand for about 2 years. The thin plastics hold up pretty well, just need to make sure you tighten the small joints, but not to the point that they crack over time. That's good to know, Thanks Duymon! You all rock, thanks for the replies! Quote Link to comment Share on other sites More sharing options...
Alphahorizon Posted May 4, 2019 Share Posted May 4, 2019 https://order.mandarake.co.jp/order/detailPage/item?itemCode=1111246447&ref=list&keyword=Macross hi-metal&lang=en Rigalt for sale I'm Mandrake. Was going to pull the trigger myself but I have the missile set version which is good enough for me. Quote Link to comment Share on other sites More sharing options...
rdrunner Posted May 4, 2019 Share Posted May 4, 2019 27 minutes ago, Alphahorizon said: https://order.mandarake.co.jp/order/detailPage/item?itemCode=1111246447&ref=list&keyword=Macross hi-metal&lang=en Rigalt for sale I'm Mandrake. Was going to pull the trigger myself but I have the missile set version which is good enough for me. Thanks. I would have bought it too but already caved last week and got another one from YJA. We can’t just have one Regult, right? Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 4, 2019 Share Posted May 4, 2019 I broke down and ordered 3 of these. 6 stands should be enough for now. I wish they were all clear, but the price is a steal imho. https://www.amazon.com/gp/product/B00WV067XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 4, 2019 Share Posted May 4, 2019 30 minutes ago, rdrunner said: We can’t just have one Regult, right? The more the merrier. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 4, 2019 Share Posted May 4, 2019 ^ ^ ^ Photoshop job ^ ^ ^ Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 4, 2019 Share Posted May 4, 2019 Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 4, 2019 Share Posted May 4, 2019 52 minutes ago, sh9000 said: LOL, great collection SH9000. I did get the regult trio, and the Glaug back then. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 4, 2019 Share Posted May 4, 2019 Thanks. I still want to do this setup. Quote Link to comment Share on other sites More sharing options...
vlenhoff Posted May 4, 2019 Share Posted May 4, 2019 Random pics Quote Link to comment Share on other sites More sharing options...
rdrunner Posted May 4, 2019 Share Posted May 4, 2019 29 minutes ago, sh9000 said: Thanks. I still want to do this setup. I’m waiting for the KO 1/60 Regult that has been teased on Taobao. Quote Link to comment Share on other sites More sharing options...
DewPoint Posted May 4, 2019 Share Posted May 4, 2019 4 hours ago, vlenhoff said: I broke down and ordered 3 of these. 6 stands should be enough for now. I wish they were all clear, but the price is a steal imho. https://www.amazon.com/gp/product/B00WV067XQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 I haven't taken out my Regult in a while, but I believe that it should come with a display stand. 1 hour ago, vlenhoff said: Random pics The Destroids are what initially got me started with HMR. Got my Monster on a sale and after handling it, I was hooked. Quote Link to comment Share on other sites More sharing options...
Slave IV Posted May 4, 2019 Share Posted May 4, 2019 4 hours ago, DewPoint said: I haven't taken out my Regult in a while, but I believe that it should come with a display stand. The Destroids are what initially got me started with HMR. Got my Monster on a sale and after handling it, I was hooked. Regults does come with a stand. That reaction you had is very typical. It was the Regult that got me. Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 4, 2019 Share Posted May 4, 2019 Quote Link to comment Share on other sites More sharing options...
jenius Posted May 5, 2019 Share Posted May 5, 2019 I like having Macross HMR releases to look forward to. I hope we get something announced soon. Quote Link to comment Share on other sites More sharing options...
Saburo Posted May 5, 2019 Share Posted May 5, 2019 Quote Link to comment Share on other sites More sharing options...
jvmacross Posted May 5, 2019 Share Posted May 5, 2019 Quote Link to comment Share on other sites More sharing options...
Zuel Posted May 6, 2019 Share Posted May 6, 2019 I've had this tab open for well over a year waiting for that announcement! I can tell you, it's been hard to resist many of the other temptations that have appeared over that time (I've succumbed twice so far). Quote Link to comment Share on other sites More sharing options...
DewPoint Posted May 6, 2019 Share Posted May 6, 2019 I still think that Bandai will release the Phalanx first in order to maximize the reaping of our wallets. Tomahawk will follow some time after followed my TWE blue Phalanx(s). Quote Link to comment Share on other sites More sharing options...
Lolicon Posted May 6, 2019 Share Posted May 6, 2019 9 hours ago, Saburo said: Very clever use of lighting, using the canopy glare to hide that empty back seat. Quote Link to comment Share on other sites More sharing options...
MKT Posted May 6, 2019 Share Posted May 6, 2019 9 hours ago, Saburo said: Saburo's always excellent pics makes it more satisfying to look at than the actual item in front of me! Quote Link to comment Share on other sites More sharing options...
seti88 Posted May 6, 2019 Share Posted May 6, 2019 Quote Link to comment Share on other sites More sharing options...
sh9000 Posted May 6, 2019 Share Posted May 6, 2019 Watched the first few episodes of SDFM earlier. Looking forward to posing more HMR and taking more pics. Quote Link to comment Share on other sites More sharing options...
rocketblast Posted May 6, 2019 Share Posted May 6, 2019 I just got 5 VF-1Ds in the mail a couple days ago and had 4 already, so just one more left I'm waiting on. I opened one up. It is really nice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.