DWN013 Posted September 13, 2018 Share Posted September 13, 2018 Just got my order, doing my 'trial run' with 2x yamato V2s. Is the grip between the hexagonal base and the attachment point that slots into it supposed to be so loose? Do you guys have tricks / recommended adhesives for the acrylic? I jammed a bit of paper towel in there for now... Also, in the instruction manual, what's the corner device looking thing? Just ignore it? Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted September 13, 2018 Author Share Posted September 13, 2018 Hello! That's just a guide to call out where to put the rubber feet. Earlier versions of the stands did come with a 3d printed plastic piece to help line it up, but I got more questions about what that piece was for than what it was worth to include. Quote Link to comment Share on other sites More sharing options...
slide Posted September 14, 2018 Share Posted September 14, 2018 10 hours ago, ChaoticYeti said: Hello! That's just a guide to call out where to put the rubber feet. Earlier versions of the stands did come with a 3d printed plastic piece to help line it up, but I got more questions about what that piece was for than what it was worth to include. No good deed, eh? Quote Link to comment Share on other sites More sharing options...
bleecher Posted September 29, 2018 Share Posted September 29, 2018 Will you be making a mount attachment for the new Bandai DX YF-19? And if so any ETA? Thanks! Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted September 29, 2018 Author Share Posted September 29, 2018 Unless Bandai have changed the shape of their slots again, the DX adapters should be sufficient. These work for me on the DX VF-19 advance release. https://www.yetistand.com/product/dx-standing-adapter https://www.yetistand.com/product/dx-banking-adapter Quote Link to comment Share on other sites More sharing options...
DWN013 Posted October 10, 2018 Share Posted October 10, 2018 So, anyone got any tips on adhesives or anything to shore up the wobbly slot attachment between the hexagonal base and its joint? Quote Link to comment Share on other sites More sharing options...
Falldog Posted October 10, 2018 Share Posted October 10, 2018 Grab some acrylic glue. Don't be a lazy crap like me and use superglue. Quote Link to comment Share on other sites More sharing options...
wmkjr Posted October 10, 2018 Share Posted October 10, 2018 4 hours ago, DWN013 said: So, anyone got any tips on adhesives or anything to shore up the wobbly slot attachment between the hexagonal base and its joint? I used weld on or Sci grip acrylic glue. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted October 11, 2018 Author Share Posted October 11, 2018 (edited) Another trick is to layer clear packing tape on the peg until it fits firmly in the slot to shore up any slack. There is a variance in the thickness of the acrylic. Adding a bit of thickness with the tape is a less permanent solution to adhesives/solvents. Shouldn't need much. Edited October 11, 2018 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
anubis20 Posted October 11, 2018 Share Posted October 11, 2018 Many thanks to @ChaoticYeti for helping me out with adapters for my Maketoys seekers!!! I think I over complicated things with elbows but I like this set up. Need to open up Skywarp to display all 3 in alt mode Quote Link to comment Share on other sites More sharing options...
davidwhangchoi Posted October 11, 2018 Share Posted October 11, 2018 looks so good! Quote Link to comment Share on other sites More sharing options...
derex3592 Posted October 11, 2018 Share Posted October 11, 2018 Very cool!!! Quote Link to comment Share on other sites More sharing options...
seti88 Posted October 12, 2018 Share Posted October 12, 2018 Cool dynamic display anubis! Quote Link to comment Share on other sites More sharing options...
Geekz Posted October 14, 2018 Share Posted October 14, 2018 (edited) Thanks ChaoticYeti!!! Edited October 14, 2018 by Geekz Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted October 14, 2018 Author Share Posted October 14, 2018 Whoa, that's a cool setup! Can you post a wider shot? Did you mount those into a shelf? Quote Link to comment Share on other sites More sharing options...
RED WOLF Posted October 14, 2018 Share Posted October 14, 2018 On 10/11/2018 at 3:17 PM, anubis20 said: Many thanks to @ChaoticYeti for helping me out with adapters for my Maketoys seekers!!! I think I over complicated things with elbows but I like this set up. Need to open up Skywarp to display all 3 in alt mode Nice! Any idea if these can hold FT Phoenix? @ChaoticYeti looking to pick up a few in the near future for my valks and Ft10x Quote Link to comment Share on other sites More sharing options...
Geekz Posted October 14, 2018 Share Posted October 14, 2018 5 hours ago, ChaoticYeti said: Whoa, that's a cool setup! Can you post a wider shot? Did you mount those into a shelf? Thanks! yup, mounted on the shelf of my desk Quote Link to comment Share on other sites More sharing options...
Sildani Posted December 29, 2018 Share Posted December 29, 2018 Just a quick post to show the RVF-171EX wing pylon adapter Yeti made for the gunpod. Luca doesn’t have to be naked anymore!!! ...wait. Quote Link to comment Share on other sites More sharing options...
Arkham Posted December 29, 2018 Share Posted December 29, 2018 Does RVF-171EX has a Super Parts set? I thought they released it only for VF-171EX and NP Quote Link to comment Share on other sites More sharing options...
borgified Posted December 30, 2018 Share Posted December 30, 2018 (edited) 1 hour ago, Arkham said: Does RVF-171EX has a Super Parts set? I thought they released it only for VF-171EX and NP The RVF-171EX doesn't have the Super Parts set only the RVF-25 Renewal has the 3 Ghosts and boosters. The only versions that have the Amoured Pack are Alto and the CF (I believe the KO set for CF has missiles only). The Maruyama set has the Amoured parts in the set. I believe Sildani got the missiles from the DX YF-19 Full Set. As for the rail gun attachment clip, I believe its custom made? Damn... I'm trying not get Yeti stands yet as I don't have a dedicated Macross shelf, but I now I'm really thinking about it. Edited December 30, 2018 by borgified details and grammar Quote Link to comment Share on other sites More sharing options...
Sanity is Optional Posted December 30, 2018 Share Posted December 30, 2018 The Luca 171 comes with hard point wings included in addition to the naked wings. I’ve got mine decked with the CF super pack. Quote Link to comment Share on other sites More sharing options...
Sildani Posted December 30, 2018 Share Posted December 30, 2018 I got a VF-171 CF armor set a while back, the armor’s from that, missiles are from the YF-19 Full Set, and the display adapter and gunpod adapter are from Yeti. Quote Link to comment Share on other sites More sharing options...
Lolicon Posted December 30, 2018 Share Posted December 30, 2018 13 hours ago, Sildani said: Just a quick post to show the RVF-171EX wing pylon adapter Yeti made for the gunpod. Luca doesn’t have to be naked anymore!!! ...wait. Hey which adapter are you using for Luca's unit? Quote Link to comment Share on other sites More sharing options...
SuNDuK Posted December 30, 2018 Share Posted December 30, 2018 and which adapter do you use for holding gun on the wing? Quote Link to comment Share on other sites More sharing options...
borgified Posted December 30, 2018 Share Posted December 30, 2018 31 minutes ago, Lolicon said: Hey which adapter are you using for Luca's unit? 3 minutes ago, SuNDuK said: and which adapter do you use for holding gun on the wing? Sildani posted that he got it through Yeti's website and I went on there 10 mins ago and saw nothing. Has @ChaoticYeti updated his website recently of the adapters (or am I not seeing it). Quote Link to comment Share on other sites More sharing options...
Sildani Posted December 30, 2018 Share Posted December 30, 2018 Okay. The stand adapter is a prototype; it works well but not with armor parts since the parts change the Valkyrie’s center of gravity. I think Yeti’s still tinkering with it. The gunpod adapter is on Yeti’s Shapeways store: https://www.shapeways.com/shops/3dyeti Quote Link to comment Share on other sites More sharing options...
Matt Random Posted January 4, 2019 Share Posted January 4, 2019 Do any of the existing adapters work with the VF-1J DX clear pieces? Looks like they have additional plastic that goes down both sides of the arm for extra support. Kind of like the VF-31 battroid stand, but with longer pieces for the extra support. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted January 5, 2019 Author Share Posted January 5, 2019 6 hours ago, Matt Random said: Do any of the existing adapters work with the VF-1J DX clear pieces? Looks like they have additional plastic that goes down both sides of the arm for extra support. Kind of like the VF-31 battroid stand, but with longer pieces for the extra support. Can you post a pic? Sounds like what they did with the SV-262. https://www.yetistand.com/product/dx-standing-adapter-sv-262-revision Quote Link to comment Share on other sites More sharing options...
Dobber Posted January 5, 2019 Share Posted January 5, 2019 Put me down as interested in a 1/48 DX stand as well Chris Quote Link to comment Share on other sites More sharing options...
Matt Random Posted January 5, 2019 Share Posted January 5, 2019 (edited) Yes, it seems similar to SV-262 version. Here's the three stand pieces. I wonder if the side tabs are the same length. Edited January 10, 2019 by Matt Random Quote Link to comment Share on other sites More sharing options...
Matt Random Posted January 11, 2019 Share Posted January 11, 2019 @ChaoticYeti - Looks like the side tabs are 1cm long on the VF-1J DX stands. Is that the same as the SV-262 standing and banking adapters? If so, I plan to put in an order to give it a try. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted January 11, 2019 Author Share Posted January 11, 2019 11 minutes ago, Matt Random said: @ChaoticYeti - Looks like the side tabs are 1cm long on the VF-1J DX stands. Is that the same as the SV-262 standing and banking adapters? If so, I plan to put in an order to give it a try. That sounds about right, but I can double check and get back to you. Thanks for measuring. Quote Link to comment Share on other sites More sharing options...
Raptor One Posted January 28, 2019 Share Posted January 28, 2019 On 1/10/2019 at 10:41 PM, ChaoticYeti said: That sounds about right, but I can double check and get back to you. Thanks for measuring. Did you ever confirm that they were the same measurements as the SV-262 adapaters? Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted January 28, 2019 Author Share Posted January 28, 2019 The SV-262 adapters should work based on another users measurements. I still haven't had a DX-1J in hand to measure the adapters it comes with myself. Quote Link to comment Share on other sites More sharing options...
Raptor One Posted January 28, 2019 Share Posted January 28, 2019 4 minutes ago, ChaoticYeti said: The SV-262 adapters should work based on another users measurements. I still haven't had a DX-1J in hand to measure the adapters it comes with myself. Nice. I may eventually get one and try it out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.