The Transformers Thread (licensed) Next

[Radioguy]

4 hours ago, Alex GS said:

How come I didn't know about this one:

Just POs one of this as well from Entertainment earth

here is the link if someone has interest for it

https://www.entertainmentearth.com/product/HSE7166

BBTS is already sold out.

That's the third or fourth reissue, yeah?

I mean it's great that they got so much right for him in Earthrise, but is he so rare or expensive on the secondary market with so many reissues? If anything, I'm surprised they haven't done more variants beyond AU and SG if he's so popular. I kinda wish they did Nemesis for the mold, or AU again, actually.

[mikeszekely]

6 hours ago, Alex GS said:

How come I didn't know about this one:

Just POs one of this as well from Entertainment earth

here is the link if someone has interest for it

https://www.entertainmentearth.com/product/HSE7166

BBTS is already sold out.

I mentioned it a bit ago.  I think, when it was originally released four years ago, that it was an excellent figure.  But it has a few flaws... the legs were retooled from the Siege figure, and the insides of his shins and calves are gray instead of blue.  He's missing the yellow rectangle on the middle of his pelvis.  And the trailer was really phoned in- a little too small, molded entirely in one color of plastic (including the repair drone, which is actually gray, not blue), and no Roller.

And that's kind of why it's so curious that it's getting reissued (and that it's selling out).  While nothing has been stated officially, reliable sources have already leaked that a Studio Series 86 Optimus Prime is coming this year.  It'll be a Commander-class, so it'll cost more than the Earthrise figure, but one assumes that with the extra budget all the flaws of the Earthise figure will be addressed.  

[Alex GS]

from FB SUPREME MECHA

this one is interesting , Transforming Statue of Optimus Prime , since is Kara Kuri I think it will be expensive but don't know the scale so I don't know  

If the price is right will try to get one

 

Edited April 10 by Alex GS

[mikeszekely]

23 hours ago, M'Kyuun said:

Legacy United Sandstorm occupied most of the room in the Hasbro Pulse box. I'll leave the in-depth review to Mike, who does a far more admirable job of it.

I mean, a review could be coming.  The entire wave did basically land at the same time.  But that affords me the luxury of starting with the Cores (hah!) and working my way up to the more expensive figures.  After doing Silverbolt yesterday, I still have one more Voyager to do first- Legacy United Cybertron-Universe Starscream.

When it comes to Unicron Trilogy designs, Cybertron Starscream was probably my least-favorite design.  The colors never really said "Starscream" to me.  This is actually applies to basically every Starscream between G1 and RID '15 (though Energon Starscream got close after absorbing some super energon), but other designs had a more traditional oval-shaped cockpit tummy (Armada, Energon, Animated, Bayverse), wings on the back (Armada, Energon, Animated, Prime, Bayverse), or Earth-based alt modes (Armada, Energon, Animated, Bayverse) to fall back on.  Instead, the design kind of rips off Don Figueroa's design for Starscream in Dreamwave's The War Within.

That said, I don't hate the design, and Hasbro did an excellent job capturing it here.  In some ways it's an improvement; his arms aren't quite so bulky, and his hips are halfway up to his chest anymore.  But it is a bit disappointing to see how much paint he's lacking.  His undersized winglets are missing some black and don't have Decepticon badges.  There's no gold on his shoulders.  The panels on his forearms and the inside of his lower legs are missing red stripes, the vents on his legs should be red, too, plus he should have black/dark blue on his knee pads.  If they were really going for toy accuracy his chest guns should be black, too, but I think they actually were gray in the cartoon, so I guess gray is fine here.

The back and sides are Starscream are fairly clean, save for the fins on his back.  You'll notice that his calves aren't hollow voids like the original toy, which is nice. The fins are a leftover from the original toy, an the CGI models in the cartoon were more-heavily based on the toys than the G1 animation, so it's one of those things were we just have to shrug and call it accurate.  If they truly bother you, though, they are just plugged into ports on his back.  They're not even attached in the box.

Starscream's accessories are this tiny Cyber Key and a rifle, done entirely in translucent purple plastic.  I'm not sure what the rifle is based on; the original Voyager-class toy that released in Japan (and as a few redecos, but not regular Starscream colors in the States) had a missile-firing gun, but I remember it being more tube-shaped.  It was also, if I recall, mostly black, which makes me again bemoan the lack of paint here.  You might also refer to pods on his shoulders as accessories, too, as they're removable and connected via 5mm pegs.

Given how accurate the original toys were to the Cybertron/Galaxy Force cartoon, you might wonder how United Starscream could really be an improvement.  And the answer, friends, is articulation.  The Cybertrons toys were already benefitting from more modern articulation than previous lines, but United really takes it up a notch.  His head is on a ball joint.  He can't really look up or tilt his head sideways, but he can look down pretty well, and looking down on other bots seems fitting for Starscream.  His shoulders rotate, and here's where things are already getting interesting.  His shoulder armor can hinge out and away from his actual shoulder, allowing him to extend his arm a full 90 degrees laterally.  They also have butterfly hinges so he can bring his shoulders forward.  His biceps swivel, and his elbows are double-jointed, getting will over 90 degrees of bend until his arms start bumping his shoulders.  His wrists swivel, and in something of a rarity for Starscreams so does his waist, though it stops at about 45 degrees to either side.  His hips can go well beyond 90 degrees in all three directions.  His thighs swivel, and his knees bend a little over 90 degrees.  His feet have a double hinge so they can tilt up about 45 degrees and a full 90 degrees down, plus he's got 90 degrees of ankle pivot.

Starscream can hold his rifle in either hand.  In addition to his fists, he's got 5mm ports on either forearm, on the outside of each leg, under each foot, and one on his back.  As previously mentioned, he also has one on each shoulder, but you'll have to remove his shoulder pods to use them for something else.

Heck, you can plug the pods into his forearms, if you like.  Kind of like they're null rays.  As for the Cyber Key, you may have noticed in the previous that it can clip into Starscream's rifle.  I can also plug into Starscream's back, like the original toy, although there's no spring-loaded gimmicks.  There's no slots for the keys on his pods, but they do have translucent purple blades in them that you can deploy manually.  I'm fine with all this!  It's like he has most of his gimmicks (key, blades, etc), but without the unnecessary "gimmick" (the spring-loaded part).  However, he is missing one gimmick that the cartoon and Supreme-class toy had (but to be fair, the original Voyager didn't either), and that's his chest guns.  In the cartoon and on the Supreme-class toy the barrels could swivel up and down, allowing him to fire them in bot mode.  They're fixed in place here, though.

Starscream's transformation is pretty similar to what I remember from the 2008 Universe Dirge toy.  The main differences seem to be folding his hands into his arms, folding up his heels, and aligning the new calf panels under the the vehicle.  Also, rather than pulling his chest up and hoping it covers enough of his face to call it a day, his back actually opens to flip his head in, exposing a faux block that looks like the top of his head.

The tetrajet-homage itself is also pretty good, though there are a few ways it's a little off.  For one, likely due to the tweaked robot proportions, stuff just doesn't sit the same way.  His shoulders, shoulder pods, and tail sit just a little too high.  The red cockpit doesn't come out quite far enough; I think they could have been potentially mitigated by changing the shape of the heel parts and making them red.  Speaking of red, the missing red stripes on his legs earlier translates to missing red stripes on his alt mode.  Likewise, the slight-too-small wings have the same issues as bot mode.  One new issues is that his ankles are made from the same dark blue plastic as thigh thighs and forearms instead of gray, leaving a strip of blue hinges near the cockpit that simply shouldn't be.  There's also the calf panels.  Seen from below they look very un-aerodynamic, like someone left the door open on a Star Wars ship.  They help prop him up when you set him down, though.  And extra hinge to bend the front up against the fuselage might have helped.

Starscream's Cyber Key can plug into the back of the jet, where it still doesn't actually do anything.  You can still deploy the blades in the shoulder pods manually.  And Starscream's gun has slots under the winglets at the back.  If you turn the rifle upside down, these slots grab onto tabs inside of Starscreams tail.

Overall, Starscream's a very good figure that I'd give a recommend to, even if you're not a huge fan of the Cybertron cartoon.  However, it's kind of apparent that he's bumping up against the limits of a Voyager-class budget, and I find myself wishing Hasbro had made him a Leader.  While some, I'm sure, would balk at paying $20 more for a figure this size it would have certainly afforded the missing paint details, bigger wings, swiveling chest guns, cleaner calf panels under the alt mode, and possible another accessory or two like the crown he had in the cartoon/Supreme-class toy.  I think that little bit more would have pushed Starscream from being "very good" to one of the very best.

Here's hoping Hasbro gets around to Energon Starscream.  I kind of want to complete the Unicron Trilogy versions for him and a few other characters.

[sh9000]

 

 

 

I ordered Earthrise Optimus since I don't have one.  I'll still order the SS TFTM Optimus when it gets released.

 

[mikeszekely]

Need to verify with a few friends that might want to go, and get a sitter for my kid because my wife will be out of town, but I think I'm going to buy tickets for the 19th.

[mikeszekely]

OK, Voyagers out of the way, we can move onto the Legacy United Leaders.  One of them is already two-year-old Laser Optimus Prime (time flies!) in a new box.  The other, as @M'Kyuun shared, is Sandstorm.

It's kind of nuts that since the guy on the right came out I've reviewed two guys named Sandstorm, but one was a Decepticon jet and one was a Predacon scorpion.  Astrotrain, Blitzwing, and Springer have all been updated post-Siege, and while I might hope for more G1-accurate post-Siege versions Octane's release in Titans Return and Broadside's in Power of the Primes are more recent than Thrilling 30 Sandstorm.  You had to figure the last main triple-changer was due!  And now that he's here... he kind of doesn't look right to me.

To be fair, I think Sandstorm is actually quite accurate... to the G1 toy.  That's the toy face with the mask, and the mix of dark and light oranges is accurate to the toy's color's.  There's even some darker orange paint outlining Sandstorm's shoulders highlighting the edges of what would have been a hollow space on the original toy.  Sculpted and painted details on his shins and stomach replicated stickers from the G1 toy.  For greater toy accuracy, though, they should have made his thighs orange and his hands black.

That said, I didn't have Sandstorm as a kid.  My strongest memories of Sandstorm are from the cartoon, which would replace much of Sandstorm's lighter orange with a yellower shade, ditch the sticker details, and most importantly, give him an actual face.  The black thighs here are cartoon accurate, but I'm still wondering why he doesn't have black hands.

Anyway, Sandstorm's got a pretty big backpack... but that's G1 toy and cartoon-accurate.

To help justify his Leader-class price tag, Sandstorm comes with quite a few accessories.  You get a black rifle that's styled to look like the one that came with the G1 toy.  You get a smaller gray pistol that seems to from the cartoon.  There's also a flat gray panel, some black parts, and a winch.

Sandstorm's head does seem to be on a ball joint, and on my copy you can tilt his head up... but it snaps back down for some reason.  No downward or sideways tilt, but his head swivels.  His shoulders also swivel and move laterally.  His biceps and wrists swivel, and his elbows bend about 150 degrees.  His waist swivels.  His hips can go a bit past 90 degrees forward, 90 degrees laterally, but only about 45 degrees backward due to his backpack.  His thighs swivel, and his knees bend 90 degrees.  His feet can tilt down but not up, and his ankles pivot about 60 degrees.

Sandstorm can hold either weapon in either hand, no issues.

And you can use 5mm ports on his backpack to store them in bot mode.  Additionally, Sandstorm has 5mm ports on either shoulder, on the outside of either forearm, on the flaps on the outsides of his legs, in the screw holes on the backs of his legs, and under his toes.  If you really need it, you can also remove his tail rotor; it's a separate part plugged into a 5mm port above his head.

With all those ports, though, there's still not a lot you can do with his other accessories in bot mode.  The bars plug into the gray panel to form a sort of cage, although anything that fit inside could simply walk out the open front and back.  The winch can plug into the top of the cage, and the other end of the rope is just a 5mm plug so Sandstorm can hold it... but what is he supposed to do with it?  Swing it like a flail?

Transforming Sandstorm into his dune buggy mode is fairly straightforward, as it doesn't really involve his backpack.  His feet fold up and his legs collapse.  His hands go into his forearms and then his forearms tuck over his biceps.  His upper body pulls away and hinges down to tab into the top of his shins, with his arms folding out and down.  With his chest open, you can pull out the engine and tuck his head inside.  Then it's just a matter of splitting the top of the tail rotor and splaying it out into a spoiler.

On the one hand, I think that aside from a little extra forearm showing and a little more helicopter kibble behind the rear wheels, that this is a pretty good take on Sandstorm's dune buggy mode.  Heck, it's even got actual rubber tires!  From the side, though, it strikes me as a little unbalanced.  The front half sits pretty high, with the vehicle sitting up off the ground, but it drops off behind the cabin with just a little gray engine sitting above a ton of mostly helicopter parts that sit very close to the ground.  I don't care for the spoiler, either.  What's that tiny thing supposed to do?  The cartoon had an actual spoiler, and while the G1 toy only had half a spoiler it was a decently-sized squarish panel, not whatever this needle-thin thing is.

The G1 cartoon had a roll cage over engine, for some reason, and that's really where the black bars come in.  Without the gray panel the bars can slide into two notches on the side of the engine.  The gray panel still has storage, though, fitting onto the backs of his legs on the underside of the vehicle.  Speaking of the underside, if you store the guns on the two 5mm ports on his backpack, same is in bot mode, he should still have just enough clearance to roll.

That said, the instructions actually suggest plugging the pistol into one of his forearms, still under the vehicle.  It also suggests plugging the winch into the engine before you enclose it with the cage, then the rifle can plug into the port on top of the cage.  However you arrange his guns, Sandstorm's dune buggy mode definitely has the most cohesive storage for all his accessories.

For helicopter mode, you'll mostly have Sandstorm something like halfway between robot and dune buggy.  His hands are still folded in and his arms still covering his biceps, but they're not folded away from his chest.  His feet are still folded up and his legs still collapsed, but the panels on the sides are folded around and his tires are arranged to lie flat against his shins.  His chest is still pulled away from his body, but his head and engine are actually collapsed more into his body instead of pulled out.  Once you get to that point, everything else is in the backpack.  The sides unfold and wrap down and around his head to form the front of the helicopter.  The rotor blades slide up and free from the clip, then the rest of the backpack folds down to cover his legs.  Doors that let the rotor pass through the backpack close up to for the top and tail.

Divorced from all sources, aside from visible tire on the rear and the tail looking a little off, this is a good helicopter mode.  There's little wheels on the back and the rotors spin.  When we consider the sources, though... I'd say he's fairly close to the G1 toy, save for two things.  One, his arms sit back farther than the they did on the G1 toy.  Two, the front of the helicopter had three blue window stickers... and that's it.  I don't know why the designers put some extra windows and mechanical details on the front of Sandstorm here.  The cartoon didn't have those extra details either, just an Autobot badge.  Hmm... I wonder if someone on the design team looked at Sandstorm's page on TFWiki, read that G1 Sandstorm is a CH-53 Sea Stallion, looked at pictures of said Sea Stallion, saw that it has those extra windows, and slapped them on United Sandstorm.  The problem there, though, is that the wiki is almost certainly wrong.  Given the four blades instead of six on the main rotor, the single horizontal stabilizer on the tail, the lack of engine nacelles on the top, and the placement of the pontoons, I think it far more likely that G1 Sandstorm was meant to be a SH-3 Sea King.  Thoughts, David?

In any case, Sandstorm's guns can be stored by conveniently plugging them into either of the two 5mm ports on his arm/pontoons.  Part of his robot tummy with the faux sticker details flips over in helicopter mode, revealing one of those little peg holes for a flight stand.

Which just leaves the winch and cage, again.  So, you can plug the winch into a 5mm port just under Sandstorm's face, between the tires on the nose on the front of the helicopter.  With the bars plugged into the panel you can plug the 5mm peg on the other end of the rope into the top of the cage.  Variants of the Sea King, especially civilian ones, are often used in search and rescue roles, so this sort of use of the accessories makes sense.  I think the real issue, though, is deciding to keep your toy in helicopter mode and finding a flight stand to keep hm elevated enough to use the cage.  Honestly, I think it's a lot easier to go toy-accurate on the dune buggy and just toss the winch and cage in a drawer somewhere and forget about them.

Objectively speaking, Sandstorm is a mostly toy-accurate representation of a G1 character who's needed an update for a long time.  Solid articulation, plentiful accessories, and engineering that makes him possibly the best-executed triple-changer Hasbro's done so far should be enough to make him an easy recommend for most people.  That said, I sincerely hope for a Gen Selects version with a "handsome Sandstorm" cartoon face, a yellower light orange plastic, and none of the extra windows or mechanical details on the front of the helicopter painted.  Then, if DNA is doing upgrade kits for United characters, a replacement tail rotor with a more G1-accurate spoiler than those rinky-dink points.

[David Hingtgen]

Sandstorm's alt-mode was so exaggerated-bland it never "gave me a vibe" as to what it is.  I'll take a look later and give more thoughts.   Blitzwing is far from a scale model of a MiG-25 but it's still blatantly obvious what he's supposed to be.  

That said---the wiki is so terrible with aircraft alt-modes.  I gave up trying to correct Octane, it's gone from bad to worse over the years.  (he's a 747 people, engine-count be damned)

::edit::   If you assume the instructions are wrong (wouldn't be the first time), G1 Sandstorm is supposed to have a horizontal stabilizer, not an odd vertical tail tip.  That does make it more SH-3 ish.   However, one of the few distinct details the toy does have for sure, is three large front windows----like an H-53   

 

 

 

[M'Kyuun]

8 hours ago, mikeszekely said:

OK, Voyagers out of the way, we can move onto the Legacy United Leaders.  One of them is already two-year-old Laser Optimus Prime (time flies!) in a new box.  The other, as @M'Kyuun shared, is Sandstorm.

It's kind of nuts that since the guy on the right came out I've reviewed two guys named Sandstorm, but one was a Decepticon jet and one was a Predacon scorpion.  Astrotrain, Blitzwing, and Springer have all been updated post-Siege, and while I might hope for more G1-accurate post-Siege versions Octane's release in Titans Return and Broadside's in Power of the Primes are more recent than Thrilling 30 Sandstorm.  You had to figure the last main triple-changer was due!  And now that he's here... he kind of doesn't look right to me.

To be fair, I think Sandstorm is actually quite accurate... to the G1 toy.  That's the toy face with the mask, and the mix of dark and light oranges is accurate to the toy's color's.  There's even some darker orange paint outlining Sandstorm's shoulders highlighting the edges of what would have been a hollow space on the original toy.  Sculpted and painted details on his shins and stomach replicated stickers from the G1 toy.  For greater toy accuracy, though, they should have made his thighs orange and his hands black.

That said, I didn't have Sandstorm as a kid.  My strongest memories of Sandstorm are from the cartoon, which would replace much of Sandstorm's lighter orange with a yellower shade, ditch the sticker details, and most importantly, give him an actual face.  The black thighs here are cartoon accurate, but I'm still wondering why he doesn't have black hands.

Anyway, Sandstorm's got a pretty big backpack... but that's G1 toy and cartoon-accurate.

To help justify his Leader-class price tag, Sandstorm comes with quite a few accessories.  You get a black rifle that's styled to look like the one that came with the G1 toy.  You get a smaller gray pistol that seems to from the cartoon.  There's also a flat gray panel, some black parts, and a winch.

Sandstorm's head does seem to be on a ball joint, and on my copy you can tilt his head up... but it snaps back down for some reason.  No downward or sideways tilt, but his head swivels.  His shoulders also swivel and move laterally.  His biceps and wrists swivel, and his elbows bend about 150 degrees.  His waist swivels.  His hips can go a bit past 90 degrees forward, 90 degrees laterally, but only about 45 degrees backward due to his backpack.  His thighs swivel, and his knees bend 90 degrees.  His feet can tilt down but not up, and his ankles pivot about 60 degrees.

Sandstorm can hold either weapon in either hand, no issues.

And you can use 5mm ports on his backpack to store them in bot mode.  Additionally, Sandstorm has 5mm ports on either shoulder, on the outside of either forearm, on the flaps on the outsides of his legs, in the screw holes on the backs of his legs, and under his toes.  If you really need it, you can also remove his tail rotor; it's a separate part plugged into a 5mm port above his head.

With all those ports, though, there's still not a lot you can do with his other accessories in bot mode.  The bars plug into the gray panel to form a sort of cage, although anything that fit inside could simply walk out the open front and back.  The winch can plug into the top of the cage, and the other end of the rope is just a 5mm plug so Sandstorm can hold it... but what is he supposed to do with it?  Swing it like a flail?

Transforming Sandstorm into his dune buggy mode is fairly straightforward, as it doesn't really involve his backpack.  His feet fold up and his legs collapse.  His hands go into his forearms and then his forearms tuck over his biceps.  His upper body pulls away and hinges down to tab into the top of his shins, with his arms folding out and down.  With his chest open, you can pull out the engine and tuck his head inside.  Then it's just a matter of splitting the top of the tail rotor and splaying it out into a spoiler.

On the one hand, I think that aside from a little extra forearm showing and a little more helicopter kibble behind the rear wheels, that this is a pretty good take on Sandstorm's dune buggy mode.  Heck, it's even got actual rubber tires!  From the side, though, it strikes me as a little unbalanced.  The front half sits pretty high, with the vehicle sitting up off the ground, but it drops off behind the cabin with just a little gray engine sitting above a ton of mostly helicopter parts that sit very close to the ground.  I don't care for the spoiler, either.  What's that tiny thing supposed to do?  The cartoon had an actual spoiler, and while the G1 toy only had half a spoiler it was a decently-sized squarish panel, not whatever this needle-thin thing is.

The G1 cartoon had a roll cage over engine, for some reason, and that's really where the black bars come in.  Without the gray panel the bars can slide into two notches on the side of the engine.  The gray panel still has storage, though, fitting onto the backs of his legs on the underside of the vehicle.  Speaking of the underside, if you store the guns on the two 5mm ports on his backpack, same is in bot mode, he should still have just enough clearance to roll.

That said, the instructions actually suggest plugging the pistol into one of his forearms, still under the vehicle.  It also suggests plugging the winch into the engine before you enclose it with the cage, then the rifle can plug into the port on top of the cage.  However you arrange his guns, Sandstorm's dune buggy mode definitely has the most cohesive storage for all his accessories.

For helicopter mode, you'll mostly have Sandstorm something like halfway between robot and dune buggy.  His hands are still folded in and his arms still covering his biceps, but they're not folded away from his chest.  His feet are still folded up and his legs still collapsed, but the panels on the sides are folded around and his tires are arranged to lie flat against his shins.  His chest is still pulled away from his body, but his head and engine are actually collapsed more into his body instead of pulled out.  Once you get to that point, everything else is in the backpack.  The sides unfold and wrap down and around his head to form the front of the helicopter.  The rotor blades slide up and free from the clip, then the rest of the backpack folds down to cover his legs.  Doors that let the rotor pass through the backpack close up to for the top and tail.

Divorced from all sources, aside from visible tire on the rear and the tail looking a little off, this is a good helicopter mode.  There's little wheels on the back and the rotors spin.  When we consider the sources, though... I'd say he's fairly close to the G1 toy, save for two things.  One, his arms sit back farther than the they did on the G1 toy.  Two, the front of the helicopter had three blue window stickers... and that's it.  I don't know why the designers put some extra windows and mechanical details on the front of Sandstorm here.  The cartoon didn't have those extra details either, just an Autobot badge.  Hmm... I wonder if someone on the design team looked at Sandstorm's page on TFWiki, read that G1 Sandstorm is a CH-53 Sea Stallion, looked at pictures of said Sea Stallion, saw that it has those extra windows, and slapped them on United Sandstorm.  The problem there, though, is that the wiki is almost certainly wrong.  Given the four blades instead of six on the main rotor, the single horizontal stabilizer on the tail, the lack of engine nacelles on the top, and the placement of the pontoons, I think it far more likely that G1 Sandstorm was meant to be a SH-3 Sea King.  Thoughts, David?

In any case, Sandstorm's guns can be stored by conveniently plugging them into either of the two 5mm ports on his arm/pontoons.  Part of his robot tummy with the faux sticker details flips over in helicopter mode, revealing one of those little peg holes for a flight stand.

Which just leaves the winch and cage, again.  So, you can plug the winch into a 5mm port just under Sandstorm's face, between the tires on the nose on the front of the helicopter.  With the bars plugged into the panel you can plug the 5mm peg on the other end of the rope into the top of the cage.  Variants of the Sea King, especially civilian ones, are often used in search and rescue roles, so this sort of use of the accessories makes sense.  I think the real issue, though, is deciding to keep your toy in helicopter mode and finding a flight stand to keep hm elevated enough to use the cage.  Honestly, I think it's a lot easier to go toy-accurate on the dune buggy and just toss the winch and cage in a drawer somewhere and forget about them.

Objectively speaking, Sandstorm is a mostly toy-accurate representation of a G1 character who's needed an update for a long time.  Solid articulation, plentiful accessories, and engineering that makes him possibly the best-executed triple-changer Hasbro's done so far should be enough to make him an easy recommend for most people.  That said, I sincerely hope for a Gen Selects version with a "handsome Sandstorm" cartoon face, a yellower light orange plastic, and none of the extra windows or mechanical details on the front of the helicopter painted.  Then, if DNA is doing upgrade kits for United characters, a replacement tail rotor with a more G1-accurate spoiler than those rinky-dink points.

I'm with David; I think Takara took inspiration from large American military helicopters while not actually copying any of them directly. I looked to see if the Japanese had any large choppers in the JDF from which they may have drawn inspiration but turned up only American helicopters like the CH/MH-53. I read the Wiki which claimed CH-53, but the SH-3 Sea King is another good example for inspiration. Comparing Sandstorm's G1 and Legacy chopper modes to both the CH-53 and H-3, notable bits, like engines, are missing from Sandstorm; the shape of the pontoons is incorrect for both SH-3 and CH-53; the large horizontal stabilizer is missing; the vertical stabilizer is too small and incorrectly shaped to match either RW chopper; the SH-3 has 5-bladed main and tail rotors while the CH/MH-53 has a 6-bladed main rotor and a 4-bladed tail rotor; the shape of Sandstorm's empennage and tail differs from either RW chopper; the number, size, and placement of the windows differ from either RW heli. In short, Sandstorm is a caricature inspired by large American helicopters. The latter is an assumption, as I haven't done a deep search to look at all of the world's large helicopters circa 1984 to see if there are better candidates. However, as the Japanese have exposure to America's military by virtue of our bases on both Honshu and Okinawa, as well as our military partnership with Japan, their direct exposure to our aircraft is likely to be the main inspiration.

[mikeszekely]

With the Leaders out of the way you might think we're done until the stragglers from the current Studio Series wave hit.  But no!  I've actually got a couple of repaints for you today.

First up we have Studio Series 86 Voyager-class Blaster.  This was one of those figures where, when it was announced, I said I wasn't going to preorder it because the original Kingdom/Legacy release was perfectly fine.  When I saw it at my local Target, though, I decided to go for it.  The simple fact is, the black biceps, hands, thighs, speakers, and toes, the black shoulder details where the original toy had stickers, the translucent window on his chest, and the metallic paint on Kingdom Blaster's face are all perfectly reasonable toy-accurate details... which is why there was always something nagging me as being slightly off.  I didn't have Blaster as a kid, but as a counterpart to Soundwave he definitely stood out to me in the cartoon.  The cartoon where he had feet that matched his shins.  The cartoon where he all those black parts were barely a darker gray than his shins.  The cartoon with a gray pattern on his chest.  The deco changes (including both toy and cartoon accurate red circles on Blaster's ankles) are subtle, sure, but to my eyes it's the difference between nearly correct and totally correct.  My only wish is that they'd used the smiling face they put on Twincast instead of the original Blaster face.

Blaster comes with a similarly improved... mostly... Rewind.  Gone is the translucent blue plastic, thankfully, and the paint on his torso has been tweaked slightly to make it more cartoon-accurate.  His arms forearms are painted white; it's a shame they couldn't have made his biceps and thighs white, too.  The one change I'm not keen on is his face.  The head is the same toy-style head, but they painted his mask white.  Now, white masks are more cartoon-accurate, but at the risk of contradicting my preference for an extremely cartoon Blaster, I actually prefer the toy-style heads with colored masks for Rewind and Eject.

In alt mode, again the deco changes are subtle but they make a difference.  Despite the extra molded dials on the Kingdom mold, only one is painted on the SS86 version.  The black lines near the bottom are gone, and the red panels are painted gray to match.  It's just enough to take the rather-busy Kingdom toy and make it that much more cartoon-accurate.

As for Eject, it's not like he's seen as more than a blue rectangle for the brief moment between flying out of Blaster's chest and transforming into a robot, so cartoon accuracy isn't a must.  Without cassette labels he's not toy accurate, either, but in that case he's no worse off than the original, but he's not translucent, so still an improvement.

If you didn't pick up Blaster before, now is definitely the time, as I consider this to be the superior deco.  If you already have the Kingdom/Legacy version, though, it's harder to say.  For me it was worth the upgrade, but I think that's a decision you'll have to make on your own.

In addition the Blaster, I've also received the Generations Selects Deluxe Autobot 5-pack.  And we'll cover them from left to right as they're packaged in the box, so first up is Jazz.  This isn't totally a fair comparison, since I put Reprolabels on my original SS86 Jazz (accidentally on the left), but the most apparent differences are actually no silver grill, the presence of stripes on the fenders on his legs, and a gray paint instead of silver on his face, waist, shins and feet.  The stripes on the fenders are a nice addition, but I prefer the silver.  I will note, however, that the newer toy has knees that lock into the shins far better than my SS86 copy.

Aside from stripes on the fenders, the newer toy has some black on the spoiler.  But the real, main difference is that his roof is white plastic with blue-painted windows instead of translucent blue plastic with white-painted metal.  Both versions had the same incorrect "14" instead of "4."  Now, I don't actually want the full racing livery, but the cartoon's over-simplified stripes never sat well with me, hence the Reprolabels on my SS86 copy.  The conclusion, for me at least, is that I strongly prefer my stickered-up original toy.  However, that version is known for developing cracks on the windshield, and sure enough I can see a small one developing.  Should my SS86 Jazz eventually break it's nice to have a backup on hand... but I'll need to buy another set of Reprolabels.

Sunstreaker's robot mode definitely strikes me as an improvement.  The darker yellow seems more correct to me, and it's more consistent since his chest is now yellow with blue-painted windows instead of yellow paint on translucent plastic.  Little touches of black have bene added to his shoulders, and the black (now dark gray) on his shins isn't just on the raised portion of the mechanical details, it's all the way through.  Best of all, his engine isn't his only accessory now.  They packed in a gun (you may recognize it as one of the two that comes with Legacy Elita-1), so you don't have to go looking for a 3rd-party gun for him.

They painted the engine area of the car dark gray, which is technically more accurate, and added the Autobot badge to the hood, which is also more accurate.  But they didn't solve the lack of a spoiler.  Instead, they just painted the rear of the car silver.  It looks kind of bad, if you ask me.  My original Earthrise Sunstreaker has very clever 3P spoiler from Go Better, and it makes Sunstreaker look that much better.  Even if I opted to remove it and put it on the new version it was designed to color-match the original release, making it too light for the new one, plus it won't totally cover the silver anyway.  So Sunstreaker is probably an improvement, but a minor one, and not worth buying this set for.

After Sunstreaker we've got Trailbreaker, and he's sort of the opposite of Sunstreaker.  I noticed that Hasbro painted his shoulder missile to be more accurate, something I did myself on the original.  They tweaked the deco on his hand cannon, too.  I don't know, this is a tough one.  Trailbreaker's one of those instances where the animation was sort of a dark gray, but I always understood that Trailbreaker was actually black.  I didn't care for Takara making MP Trailbreaker gray when all the 3Ps did black ones, and my instinct is to prefer the original black Earthrise release.

But then you get him into alt mode.  I still like the silver and black over the gray and other gray, but the blue-painted windows really win me over.  YMMV, but I kind of prefer the new Trailbreaker.  That said, I don't think he's worth buying this whole set over.

Number four in the set is Wheeljack.  Now we're getting somewhere!  Wheeljack's got the simplified pattern on his chest and legs that the cartoon does, swaps the black parts for a dark gray, and swaps the weird off-white of Earthrise Wheeljack for a more pure white.  Not only does all of that make him better resemble the animation mode, but it makes him a closer match for the just-released Origins Wheeljack, which is a win in my book.  Like the other releases in this set it also swaps the translucent plastic on his chest for blue-painted windows, and I think that more than anything else improves Wheeljack's cartoon likeness.  As with Sunstreaker, Wheeljack's got a new rifle.  You probably won't be surprised to hear that it's the other rifle that came with Elita-1.  This does allow you to, out of the box, give him a shoulder-mounted weapon and a gun instead of trying to decide whether he should wear his gun or hold it like Origins and Earthrise, which is a plus, however the shoulder weapon is still more toy-style than cartoon accurate.

Now, here's where opinions are likely to diverge.  Earthrise Wheeljack, especially with the Replrolabels I put on him, looks a lore more like the G1 toy, and some people are bound to prefer that.  But the cleaner deco on the new version is more cartoon-accurate, which I also like.  If I had to choose just one, honestly, I think I prefer the new one.  That's the one I'll display with my other Autobots. Wheeljack might be the first figure in this set that I'd say is definitely worth upgrading to, especially if you're on the fence about some of the others but didn't think they alone were worth it.  But the temptation is strong to buy some 3rd party toy-style accessories and keep the Earthrise figure as my toy-style Wheeljack (it's too bad I can't find a toy-style head for Kingdom Blaster to do the same). 

The star of the set, though, is Hound.  If you picked up Legacy Detritus then Hound shouldn't be unfamiliar to you, as he's the same Earth-mode Jeep retool of Siege Hound, with the same new cartoon-accurate shoulder-launcher and pistol.  Being based on an Earth mode means that Hound's got the bumper, fenders, winch, and more-accurate grill and cleaner legs compared with Siege Hound, but the colors are also tweaked from darker green and black to a more cartoony lighter green and gray.  Cartoon-style yellow stripes are present on his waist and forearms (but they missed the one on his biceps).  If I have one complaint about the robot mode, it's that his thighs, face, and the winch on his chest are actually a very light green.  While this does reflect how he was colored in at least a few scenes in the cartoon I think silver wound still have been a better choice.

Alt mode is the same as Detritus', which is to say that it's certainly a lot close to a Willys and more recognizable as a Jeep than the Siege toy.  He does suffer the same problems as the Siege toy, though; he doesn't have seats, just a hollow back, and his feet bulge out from the sides of the jeep in a way that's not accurate.  To be truly cartoon-accurate it might have been nice to have his mounted machine gun, too, but storage for his shoulder launcher and pistol is adequate.  For me, Earth-mode Hound gets to live with the bulk of my Autobots while Siege Hound goes with, well, most of the Siege releases and the Origins as the pre-Earth Cybertronian versions.  Straight up, I bought this set because I wanted this Hound.  I think that's why most people did.  As good as Hound is, I think paying $100 for five figures that you really only need one of is a hard sell, though.  The question really comes down to whether you have the other four or not, and if you do, whether you think the ones in this set are upgrades over the original decoes.  For me, Wheeljack is for sure, Jazz definitely isn't (but it's nice to have a spare in case the translucent plastic on the original breaks), and Sunstreaker & Trailbreaker are right on the border.  Overall, I'm happy I got this set, so make of that what you will.

[sh9000]

I'll be watching the first G1 episodes in theaters on 5/18 or 5/19.  Hopefully the table read is live in my area.

Robosen Megatron.

[mikeszekely]

Cool, if you like expensive robots that transform for you.  I'd rather they announce that they're taking preorders for Ginrai on Pulse.

Also, if they don't want the mess that wave 2 was, they need to start talking about wave 3 of Legacy United.

[M'Kyuun]

1 hour ago, sh9000 said:

I'll be watching the first G1 episodes in theaters on 5/18 or 5/19.  Hopefully the table read is live in my area.

Robosen Megatron.

Interesting. I'm guessing they're going with a tank mode, as a pistol at that scale would be ludicrous except in the hands of someone with gigantism. (Sadly, Andre's no longer with us). Moreover, there's the old chestnut with gun restrictions. I'm still curious to see what they pull off. Robosen have proven themselves extremely adept at doing what seemed impossible- making Transformers toys that can move autonomously and transform on their own. As I get older, more and more I get to see what was once sci-fi become reality. Fantastic!

[Black Valkyrie]

 

The price for Ginrai is way too expensive, maybe I`d better stick with my Optimus Prime Tenseg Base, transformation very similar to Ginrai . 

 

[mikeszekely]

If for some reason you still don't have one, Siege Jetfire is getting a reissue.  So is the Shattered Glass Optimus & Ratchet pack.  Pulse is sold out of both already, but both can still be ordered at BBTS or Entertainment Earth.

Supposedly MP-60/MPG-09 will go up for preorder at US stores tomorrow.  I'll be curious to see if Pulse's official price comes out to be less than the $300 TFSource is already asking.

[mikeszekely]

So... with weird delay on Swoop, I guess Voyager-class Bumblebee Shockwave will wrap up the current wave of Studio Series figures, for now.

I feel like comparisons with the Core-class figure released awhile back are inevitable, because they're really similar despite the size difference.  And, yeah, I get it, they're the same character, of course they're similar.  But no, I mean they're more similar than, say, Siege Leader-class Shockwave and Legacy Core-class Shockwave.

But let's focus on what's different.  For one, the shade of purple used for the plastic is quite a bit more blue.  Honestly, though, I think my camera and lights are making it look a lot bluer than it actually is, and in-hand I think it's pretty close to the color seen in the film.  You might notice that some of the light gray parts on the Core-class figure, like the feet, thighs, hips, ears, etc. are a bit darker.  Again, I think my camera's not accurately capturing things, because it hand they're quite dark.  Now, some parts that are supposed to be like his inner machinery are supposed to be dark, but outer armor parts like his thighs, ears, most of his feet, plus the stripes at the tops of his shins and the little trapezoid on his abs are supposed to be silver or even kind of whitish.  So where's all the Voyager budget going?  Some painted copper details on his biceps and forearms?  Crappy-looking weathering on his thighs?

There's some gunmetal accents on his shoulders and forearms, and even some purple paint on the sides of his thighs and back... but not his butt.  And, again, no silver on his feet and thighs, and nothing really hiding how hollow his lower legs are.  Curiously, the treads on the insides of his forearms are also not painted, and this is one of the details where the Core-class toy actually does have paint.  But I wonder if that's not a more deliberate choice here, since Shockwave didn't have visible treads on his arms in the movie.  Oh, so I guess we can scratch "transforming treads" off the budget.

I don't know that accessories ate up the budget, either.  He comes with his arm cannon, but so did the Core-class toy.  The only other accessory is a rubber hose.

Does the Voyager-class Shockwave have better articulation?  His head swivels, no tilt.  His shoulders can rotate and move nearly 90 degrees laterally.  Shockwave's elbows bend 90 degrees.  That's all about the same, so far.  Bicep swivels?  Well, Shockwave has a swivel below the elbow... but so does Mini-Wave.  Shockwave doesn't actually have a real bicep swivel above the elbow, though.  Mini-Wave does, and the fact that a Core-class figure can get the budget for engineering that the Voyager didn't is kind of galling.  Well, at least Shockwave has wrists swivels and a waist swivel that Mini-Wave doesn't.  His hips go forward, backward, and laterally about 90 degrees, a little more than what Mini-Wave got.  Plus he's got thighs swivels that Mini-Wave didn't get.  Shockwave's knees bend 90 degrees, which is also slightly more than Mini-Wave.  Both have feet that tilt up slightly and down a significant amount (technically a little more on Mini-Wave), but only Shockwave has ankle pivots, even if they're extremely limited.  I guess, yeah, Voyager-class Shockwave does have better articulation than his Core-class twin... but don't we expect more out of a $35 toy than a $10 one?  A more fair comparison would really be other Voyager-class toys, where he's really at the baseline standard for most of his joints except his bicep swivel and ankle pivots, where he's well below-average.

Shockwave's arm cannon uses a tab that fits into a slot on the outside of his forearm to connect, and the rubber hose has one end plugged into a hole on the cannon and the other into a hole on his back.  You'll notice that it's turned 90 degrees compared to the Core-class figure.  Looking around the net at concept art, movie stills, and model kits makes me think that the Voyager actually has it right, but the one and only advantage of the swivel below the bicep is that you can turn his forearm to orient the cannon like the Core-class's if you prefer.

Considering the price difference between these two figures, it's honestly shocking how similar the engineering actually is.  In both cases his feet fold down, he does a split, and then joints in his thighs hinge his legs back down.  In both cases his chest double hinges out from his body and then under his crotch, with his legs pegging into the chest and a flap with his abs folding underneath.  In both cases a joint in his mid torso rocks his upper body, head, and shoulders into the gap his chest vacated.  In both cases you have to remove his arm cannon, swivel his arms so his shoulders are slightly angled behind him, turn his forearms 90 degrees, and bend his elbows a bit so the treads under his forearms touch the ground.  The differences are that his hands actually fold into his forearms, there's some shifting of his calves, his arms tab into his back instead of linking with his hips, and his head tucks in while a dedicated support for the cannon folded out with his chest.  The cannon itself also does a little bit of transforming, with the barrel extending, but that's really it.

I'm not sure I've ever seen concept art of Shockwave's alt mode, so I can't say if it's actually more accurate.  The hose is cool, and I like that his hands and face aren't visible.  Those seem like improvements.  But I think his feet look worse, with more of the inside of his bellbottoms exposed, and the back of his cannon is just a big hollow gap now.  Shockwave's upper body doesn't lock into place as well as Mini-Wave's, but his arms get and stay in place better.  All-in-all, it's kind of a wash.

Shockwave's turret can swivel and you can elevate the barrel... same as the Core-class version.  But, he's got wheels in his treads, now, so at least he rolls.  I guess that's an upgrade.

I'm coming away from Shockwave a tad disappointed.  I mean, he's really not a bad The sculpt on the figure is honestly quite good, and he does have a number of paint apps, plus the translucent chest and light-piped mono-eye.  I'm quite glad to have a Shockwave that's in-scale with my other Bumblebee movie figures instead of a random (and at the time, one-off) Core-class, and I think he'll look pretty darn good in a display with those figures.  But, a lack of silver paint in the areas that really needed it would have been better than a few touches of copper, and it really does irk me that that couldn't have budgeted/engineered his upper arms to be two parts instead of just one so that he could have a bicep swivels when they used the kind of engineering I'm asking for on the Core-class toy.  It's things like that that take what could have been a great figure and dragged him down to merely adequate.  I'd say he's still worth picking up if you've been collecting the Bumblebee Studio Series figures and you're looking to complete that Cybertron battle scene, but if you haven't been collecting the other Bumblebee figures then Shockwave probably isn't the place to start.

EDIT: OK, one last picture... Shockwave and Shockwave getting together so Shockwave can have a playdate with Shockwave.

Edited yesterday at 04:33 AM by mikeszekely

[treatment]

wotafa's...

 

[M'Kyuun]

12 hours ago, treatment said:

wotafa's...

 

Wotafa's reviews always evoke a smile or a laugh. I don't speak Nihongo, but his enthusiasm and presentation carry the message clearly. This is a guy who really likes toys and has the personality and skill to show them off in a light and enjoyable manner regardless of language.

Gotta say, Takara did a good job with OG Wheeljack. Sure, his bot mode is a little compromised to fit all those panels, but in this case, I'd prefer all the panel-fu over his just being a big shellformer where the entirety of the vehicle mode maybe split into two parts and folded into one another. This guy's engineering took ingenuity and manipulating all those leg bits to form his boxy Cybertronian hover-van mode is satisfying. Love, too, how, like the toon, his arms form the front of the vehicle. They didn't need to add his shield, or his little propellers, but they did to complete the scene, and I appreciate that. The proverbial frosting, though, is being able to fit OG Bee, after folding the outer bits of his hull, fully into Wheeljack's vehicle mode. Again, they could have just phoned this fig in, but they went the extra mile to bring him as close to the animation as possible at this size class and I think they did an admirable job. What he lacks in accuracy in bot mode he makes up in sheer fun factor, play experience, and nostalgia. I think most G1 fans will be happy to have him. I surely am.

[obakesan]

couple re-issues of some figures have gone uo on Hasbro Pulse - notable is the Seige Jetfire

https://news.tfw2005.com/2024/04/16/po-alert-jetfire-prime-and-ratchet-siege-and-shattered-glass-resissues-available-508783

[mikeszekely]

1 hour ago, obakesan said:

couple re-issues of some figures have gone uo on Hasbro Pulse - notable is the Seige Jetfire

https://news.tfw2005.com/2024/04/16/po-alert-jetfire-prime-and-ratchet-siege-and-shattered-glass-resissues-available-508783

They're already sold out of Jetfire.  They were sold out yesterday, so I gave links to BBTS and Entertainment Earth instead.

19 hours ago, mikeszekely said:

If for some reason you still don't have one, Siege Jetfire is getting a reissue.  So is the Shattered Glass Optimus & Ratchet pack.  Pulse is sold out of both already, but both can still be ordered at BBTS or Entertainment Earth.

But you know what Pulse isn't sold out of?

MP-60 Ginrai

MPG-09 Super Ginrai

Prices are $159.99 and $279.99, respectively, and they're available at BBTS, Entertainment Earth, and other US-based toy stores.  TFSource is probably bummed that they had to drop their $300 price to compete with all the other US stores that waited for the official price.

Anyway, I caved and preordered MPG-09.  I have issues with some of Takara's design choices, but Powermaster Optimus is the only Optimus I had as a kid, and MPG-09 is hitting my nostalgia button.

[sh9000]

https://www.transformers40thcinemaevent.com

Tickets are now available to purchase.

[mikeszekely]

6 minutes ago, sh9000 said:

https://www.transformers40thcinemaevent.com

Tickets are now available to purchase.

I think they've been available since the 10th.  I bought tickets on Sunday for May 19th.

[M'Kyuun]

28 minutes ago, mikeszekely said:

I think they've been available since the 10th.  I bought tickets on Sunday for May 19th.

I'm catching it on Sat the 18th with the wife. I seldom go to downtown Spokane (parking is expensive), but as it happens, the mall with the theater playing Transformers just got a LEGO Store last year, so that and eating somewhere where we don't usually frequent are additional draws. Kinda wish they'd come up with some new animation for this instead of just playing a few eps of the old toon (as much as I love it), but I guess we have Transformers One to look forward to in the fall. I hope it's good.

[sh9000]

5 hours ago, mikeszekely said:

I think they've been available since the 10th.  I bought tickets on Sunday for May 19th.

Oh I wasn't aware and barely saw an email about it today.  Also going on Sunday.

[Alex GS]

On 4/16/2024 at 5:39 PM, mikeszekely said:

If for some reason you still don't have one, Siege Jetfire is getting a reissue.  So is the Shattered Glass Optimus & Ratchet pack.  Pulse is sold out of both already, but both can still be ordered at BBTS or Entertainment Earth.

Supposedly MP-60/MPG-09 will go up for preorder at US stores tomorrow.  I'll be curious to see if Pulse's official price comes out to be less than the $300 TFSource is already asking.

not joking Missing Link C01, C02 and MP 44S reignite my love for Transformers once again , now Im looking daily for Transformers  news, new releases, G1, Studio Series, etc. In the meantime a few moments ago I POd Cybertron Siege Commander JETFIRE from BBTS , saw some videos of the past release of JETFIRE and it looks amazing.  

[mikeszekely]

2 hours ago, Alex GS said:

not joking Missing Link C01, C02 and MP 44S reignite my love for Transformers once again , now Im looking daily for Transformers  news, new releases, G1, Studio Series, etc. In the meantime a few moments ago I POd Cybertron Siege Commander JETFIRE from BBTS , saw some videos of the past release of JETFIRE and it looks amazing.  

I had some thoughts on Jetfire...

I post a lot of news and reviews here (and sometimes in the unofficial TF thread), so I hope you'll stick around!