Jump to content

Whats Lying on your Workbench MK IV


Urashiman

Recommended Posts

1 hour ago, pengbuzz said:

Hey...all you need to do is just detail the stand with some panels and paint it in varying shades of gunmetal/ gray. They could be skimming the surface of an ARMD on their way to a sortie. Just a few square pieces of plastic and some paint and you'd be good to go!

Good point, I think I'll try it, nothing to lose :)

Link to comment
Share on other sites

7 hours ago, pengbuzz said:

Hey...all you need to do is just detail the stand with some panels and paint it in varying shades of gunmetal/ gray. They could be skimming the surface of an ARMD on their way to a sortie. Just a few square pieces of plastic and some paint and you'd be good to go!

Question, what section is Hikaru launching from here? Screenshot_20200626_222606_com.google.android.youtube.jpg.cc5cf5ed1726cb40aa260a01aaa22cd1.jpg

I can't seem to match up the geometry here:armd-dyrl.gif.ecd4492e5b3874d093600dfc690f5f58.gif

I know in the beginning of DYRL, they are launch from sides (not the blue stripe side).  What about the end of the movie?

 

Link to comment
Share on other sites

3 hours ago, peter said:

Question, what section is Hikaru launching from here? Screenshot_20200626_222606_com.google.android.youtube.jpg.cc5cf5ed1726cb40aa260a01aaa22cd1.jpg

I can't seem to match up the geometry here:armd-dyrl.gif.ecd4492e5b3874d093600dfc690f5f58.gif

I know in the beginning of DYRL, they are launch from sides (not the blue stripe side).  What about the end of the movie?

 

If I had to guess, the angle's a bit off but it mostly looks like the top angled section of the port side, just before the deck becomes completely flat.

Link to comment
Share on other sites

Well...it's been bugging me for a while now, but I decided today to make the final original counterpart of my factory diorama: the transport buggy:

 

100_1063.JPG.ff3510cd10c6ce86b11194a41e041034.JPG100_1064.JPG.ca67caaae52376ea52a7b99500ea70a3.JPG100_1065.JPG.62fe965e4f0cea650445239797ddd8bb.JPG100_1066.JPG.00dba4285015cacb5c12073cb3ee4802.JPG100_1068.JPG.1cfdd7413bd8c526d079aac2a6be73ab.JPG100_1069.JPG.d71144c7c276a706d864db37e31e5c4b.JPG

I got an old pilot figure from a busted P-51 Mustang in 1/72, and used a spare seat from the failed Bandai VF-1S kit I had. I then took some anonymous spare parts (including some 1/72 landing gear wheel spares), some scrap styrene, and a bit of glue and paint.

I'll try to get some pics of it in the display tomorrow, when the light's better. Cheers folks! (not that I'm British by any means! :p )

Link to comment
Share on other sites

10 hours ago, Gabe Q said:

@DuymonThat's awesome! What process did you use to make the pilot?

I just bought some smooth-on kits and made a two piece mold of the figure using legos and clay for the first half, and then did the second half with some mold release.

To fit in the hase 1/48 i had to trim the hard legs just below the knee and then cut away a little bit of the extra bulk under the arms for a perfect fit

20200710_101731_HDR.jpg.31549c45d4936b4217661fb135f4e3fc.jpg

Edited by Duymon
Link to comment
Share on other sites

38 minutes ago, Duymon said:

I just bought some smooth-on kits and made a two piece mold of the figure using legos and clay for the first half, and then did the second half with some mold release.

To fit in the hase 1/48 i had to trim the hard legs just below the knee and then cur away a little bit of the extra bulk under the arms for a perfect fit

20200710_101731_HDR.jpg.31549c45d4936b4217661fb135f4e3fc.jpg

Great summary of the molding process. Thanks for the pics!

Link to comment
Share on other sites

Pengbuzz - That looks great, especially cobbled together from bits and pieces! So where's the masking tape on it:D

Duymon - Cool casts of that pilot. Is it just me, or does it look like the Predator character? - MT 

Link to comment
Share on other sites

4 hours ago, Duymon said:

I just bought some smooth-on kits and made a two piece mold of the figure using legos and clay for the first half, and then did the second half with some mold release.

To fit in the hase 1/48 i had to trim the hard legs just below the knee and then cut away a little bit of the extra bulk under the arms for a perfect fit

20200710_101731_HDR.jpg.31549c45d4936b4217661fb135f4e3fc.jpg

Nice, these look awesome!!!! Are you making a Navy Low-Vis out your Hasegawa kit? 

Crowd Applause GIFs | Tenor

 

Link to comment
Share on other sites

3 hours ago, Duymon said:

Yeah I was thinking of making some UN Navy valks :D

That's what I would do, I haven't finished building my 1/48 kit yet but they are very well detailed... prefect for a UN Navy Squadron. B))

Link to comment
Share on other sites

Buzz Lightyear To The Rescue!!! Good fun little kit. The wings are spring loaded and work great with a push of the big red button on his chest. The winglets then pull out and lock into place. 

20200711_104630.jpg

20200711_104641.jpg

20200711_104716.jpg

20200711_104704.jpg

20200711_104731.jpg

20200711_104620.jpg

20200711_113017.jpg

Edited by derex3592
Link to comment
Share on other sites

Ok guys, amateur hour again.  I literally have no artistic sense whatsoever, and no fabrication skills at all, so go easy, lol!

I originally started off with an old cutting board screwed to another board, and the Valks supported on hex keys, and the base just sprayed dark gray.  It was barely big enough to support the four members of Skull, but then that loser from Prometheus got lost and is now tagging along.

IMG_20200706_011146.jpg.2ffa24e77e641d1e7b058dd096035503.jpg

I really wanted a section of the ARMD carrier as a base, but there was no way I could fabricate 5 launcher arms and launch bays, so I settled on trying to replicate a simpler section of the carrier.

IMG_20200711_200255.jpg.3646ce3164cc02f15d9b2e22a3437538.jpg

Wait for it....when you get to the end of this post, you'll be scratching your heads wondering how the end product even resembles that section, hahahaha!

IMG_20200711_162434.jpg.62197ee6730298861650d4fab582a29c.jpg

Anyway, found another old cutting board.

IMG_20200711_163340.jpg.a2b3d41d881542782aa6ee7aeac6bdf0.jpg

Cut an angle on it to sort of look like part of the ARMD.

IMG_20200711_171932.jpg.76b274ba446e7f9fde41e7cd91ed7d6f.jpg

I even cut a panel line into the board...though if you look closely, it's jagged as $hit and not smooth or straight.  I screwed the boards together from the bottom and started hot-gluing bits and bods to it.  I'm not only terrible at greebling, I just used whatever I had laying around instead properly cutting styrene to panel-looking shapes .

IMG_20200711_195500.jpg.9837bfc322392a35d2cb1262e0efb6a0.jpg

Another blast of spray paint and now I'm just watching paint dry.

 

Link to comment
Share on other sites

4 hours ago, peter said:

Ok guys, amateur hour again.  I literally have no artistic sense whatsoever, and no fabrication skills at all, so go easy, lol!

I originally started off with an old cutting board screwed to another board, and the Valks supported on hex keys, and the base just sprayed dark gray.  It was barely big enough to support the four members of Skull, but then that loser from Prometheus got lost and is now tagging along.

IMG_20200706_011146.jpg.2ffa24e77e641d1e7b058dd096035503.jpg

I really wanted a section of the ARMD carrier as a base, but there was no way I could fabricate 5 launcher arms and launch bays, so I settled on trying to replicate a simpler section of the carrier.

IMG_20200711_200255.jpg.3646ce3164cc02f15d9b2e22a3437538.jpg

Wait for it....when you get to the end of this post, you'll be scratching your heads wondering how the end product even resembles that section, hahahaha!

IMG_20200711_162434.jpg.62197ee6730298861650d4fab582a29c.jpg

Anyway, found another old cutting board.

IMG_20200711_163340.jpg.a2b3d41d881542782aa6ee7aeac6bdf0.jpg

Cut an angle on it to sort of look like part of the ARMD.

IMG_20200711_171932.jpg.76b274ba446e7f9fde41e7cd91ed7d6f.jpg

I even cut a panel line into the board...though if you look closely, it's jagged as $hit and not smooth or straight.  I screwed the boards together from the bottom and started hot-gluing bits and bods to it.  I'm not only terrible at greebling, I just used whatever I had laying around instead properly cutting styrene to panel-looking shapes .

IMG_20200711_195500.jpg.9837bfc322392a35d2cb1262e0efb6a0.jpg

Another blast of spray paint and now I'm just watching paint dry.

 

Actually Peter.... you're doing an awesome job!!! Finding parts that resemble what you're looking for and using household materials is the number one skill when it comes to kitbashing/ scratchbuilding.

(Little secret for ya: the arm launchers on my Strike VF-1S were wooden yard stakes  in a previous life!)

Don't worry about that panel line that "isn't straight": with the amount of abuse the Macross likely took when it made the trip home, it will make it look like the ship took a dent there. If it bothers you, just sand it a little and repaint it with black primer before you go on to the color coats.

Please keep going with this; I'd like to see what you do with it!

Link to comment
Share on other sites

Okay, last shots for the Macross Factory in 1/72:

100_1074.JPG.87f7936c85395c6aaff24d812f5b2d87.JPG 100_1075.JPG.e816adf28212577e039ad0dadae79dca.JPG 100_1076.JPG.a33c645616196a609ba294e918ebe39e.JPG100_1081.JPG

100_1082.JPG.f58ac045642d8eccf32f3ca69130de6d.JPG 100_1079.JPG.b526bd3c6e88759af7672579a7a162ed.JPG

The buggy is the last of he vehicles; aside from maybe some more figures and some human-scale equipment (such as welders, air tank carts, coffee cups, etc), I think this is it for this one!

(unless I get another idea, like "sumo" armor for the 1J... )

Edited by pengbuzz
Link to comment
Share on other sites

10 minutes ago, pengbuzz said:

Actually Peter.... you're doing an awesome job!!! Finding parts that resemble what you're looking for and using household materials is the number one skill when it comes to kitbashing/ scratchbuilding.

(Little secret for ya: the arm launchers on my Strike VF-1S were wooden yard stakes  in a previous life!)

Don't worry about that panel line that "isn't straight": with the amount of abuse the Macross likely took when it made the trip home, it will make it look like the ship took a dent there. If it bothers you, just sand it a little and repaint it with black primer before you go on to the color coats.

Please keep going with this; I'd like to see what you do with it!

Lol, thanks :). 

 

However that is about as far as I am able to go with this thing.....already brought it upstairs and threw the Valks onto it :).

Will post more pics in the thread that started this whole mess, hahahahaIMG_20200712_003530.jpg.f17125b25e1347ddd6c0bbbe57226d8d.jpg

 

 

Edited by peter
Edited to add a link
Link to comment
Share on other sites

3 minutes ago, pengbuzz said:

Okay, last shots for the Macross Factory in 1/72:

100_1074.JPG.87f7936c85395c6aaff24d812f5b2d87.JPG 100_1075.JPG.e816adf28212577e039ad0dadae79dca.JPG 100_1076.JPG.a33c645616196a609ba294e918ebe39e.JPG100_1081.JPG

100_1082.JPG.f58ac045642d8eccf32f3ca69130de6d.JPG 100_1079.JPG.b526bd3c6e88759af7672579a7a162ed.JPG

The buggy is the last of he vehicles; aside from maybe some more figures and some human-scale equipment (such as welders, air tank carts, coffee cups, etc), I think this is it for this one!

(unless I get another idea, like "sumo" armor for the 1J... )

Now that looks good.

Link to comment
Share on other sites

51 minutes ago, peter said:

Lol, thanks :). 

 

However that is about as far as I am able to go with this thing.....already brought it upstairs and threw the Valks onto it :).

Will post more pics in the thread that started this whole mess, hahahahaIMG_20200712_003530.jpg.f17125b25e1347ddd6c0bbbe57226d8d.jpg

 

 

What you might want to try is drybrushing the base with a dark grey paint (drybrush: dip brush into paint, brush it onto paper towel until nearly gone and then brush the remaining paint on the model as a weathering effect). You can build this up to make the base look better and bring out the detail.

Link to comment
Share on other sites

28 minutes ago, pengbuzz said:

What you might want to try is drybrushing the base with a dark grey paint (drybrush: dip brush into paint, brush it onto paper towel until nearly gone and then brush the remaining paint on the model as a weathering effect). You can build this up to make the base look better and bring out the detail.

I might try that.  Was thinking maybe even layer on some lighter gray over the dark gray.

Link to comment
Share on other sites

Peter - I posted in your main build thread, but the stand looks great! Maybe some weathering would add character to it? Right now, the focus is on the valks, detailing it may help pull it in together. It still looks great though!

Pengbuzz - That build came out awesome! The details really make it pop! I always wanted to do something like that, but with moving all the time, it just wasn't going to survive the moves. You pulled it off great!

Derex - Your stand looks professional and will compliment your build nicely! I look forward to seeing it completed. - MT

Link to comment
Share on other sites

Evil scientists laugh - MuuuHaaahaaahaaa! It works! FINALLY, I got an autocap cannon to work AND fit inside the turret properly! I'll post more photos later and make a movie, but there are still adjustments that need to be made so it can elevate inside the turret. Since the cap gun works, I started prepping the turret to accept the hardware and make scale details. The cool part is there is a slow gearmotor to give it more torque. The motor matches the 2-3 rounds a minute of the real MK-45 Mod 4 gun mount adding to the realism.

I can't be in the shop all the time, so I busted out a couple of Dunbine models to sit with the family while one of our cats busted out the box. I was looking at possibly converting one into a Bioroid from Southern Cross. After looking at all the models, I realized there is a theme. Not the obvious "Hey, they look like insects." It was that they all have weapons in the crotch! What the heck!?!? To make it worse, they are built on an ABS ball frame with tiny joints that pop off if you look at it wrong. The green one, "Tod Wryneck" is the worst. The Red/orange "Leprechann" isn't so bad. It's too bad because they have the good ole multi-color sprues Bandai is known for. Still don't know about the bioroid. They're gonna need some "surgery" first:D - MT

0711202003c.jpg

0711201157.jpg

0711201915d.jpg

0612202051.jpg

0711202006a.jpg

0622201542.jpg

Link to comment
Share on other sites

10 hours ago, peter said:

I might try that.  Was thinking maybe even layer on some lighter gray over the dark gray.

That would work, as well as taking a black pen/ pencil and doing in some smaller panel lines over the surface.

Link to comment
Share on other sites

43 minutes ago, MechTech said:

Evil scientists laugh - MuuuHaaahaaahaaa! It works! FINALLY, I got an autocap cannon to work AND fit inside the turret properly! I'll post more photos later and make a movie, but there are still adjustments that need to be made so it can elevate inside the turret. Since the cap gun works, I started prepping the turret to accept the hardware and make scale details. The cool part is there is a slow gearmotor to give it more torque. The motor matches the 2-3 rounds a minute of the real MK-45 Mod 4 gun mount adding to the realism.

I can't be in the shop all the time, so I busted out a couple of Dunbine models to sit with the family while one of our cats busted out the box. I was looking at possibly converting one into a Bioroid from Southern Cross. After looking at all the models, I realized there is a theme. Not the obvious "Hey, they look like insects." It was that they all have weapons in the crotch! What the heck!?!? To make it worse, they are built on an ABS ball frame with tiny joints that pop off if you look at it wrong. The green one, "Tod Wryneck" is the worst. The Red/orange "Leprechann" isn't so bad. It's too bad because they have the good ole multi-color sprues Bandai is known for. Still don't know about the bioroid. They're gonna need some "surgery" first:D - MT

0711202003c.jpg

0711201157.jpg

0711201915d.jpg

0612202051.jpg

0711202006a.jpg

0622201542.jpg

 

First rule with cats: "If it fits, i sits!" lol

Good job on the cap gun! looking forward to seeing that mounted! :D

 

And uh yeah... those guys definitely need "surgery"...

Link to comment
Share on other sites

5 hours ago, MechTech said:

Evil scientists laugh - MuuuHaaahaaahaaa! It works! FINALLY, I got an autocap cannon to work AND fit inside the turret properly! I'll post more photos later and make a movie, but there are still adjustments that need to be made so it can elevate inside the turret. Since the cap gun works, I started prepping the turret to accept the hardware and make scale details. The cool part is there is a slow gearmotor to give it more torque. The motor matches the 2-3 rounds a minute of the real MK-45 Mod 4 gun mount adding to the realism.

I can't be in the shop all the time, so I busted out a couple of Dunbine models to sit with the family while one of our cats busted out the box. I was looking at possibly converting one into a Bioroid from Southern Cross. After looking at all the models, I realized there is a theme. Not the obvious "Hey, they look like insects." It was that they all have weapons in the crotch! What the heck!?!? To make it worse, they are built on an ABS ball frame with tiny joints that pop off if you look at it wrong. The green one, "Tod Wryneck" is the worst. The Red/orange "Leprechann" isn't so bad. It's too bad because they have the good ole multi-color sprues Bandai is known for. Still don't know about the bioroid. They're gonna need some "surgery" first:D - MT

0711202003c.jpg

 

That's great! I can't wait to see that in action.

17 hours ago, peter said:

Lol, thanks :). 

 

However that is about as far as I am able to go with this thing.....already brought it upstairs and threw the Valks onto it :).

Will post more pics in the thread that started this whole mess, hahahahaIMG_20200712_003530.jpg.f17125b25e1347ddd6c0bbbe57226d8d.jpg

 

 

Like the base a lot. What you could do is put the partial letters for ARMD 01 or 02 running off the edge of it. Maybe even some battle damage or scarring.

17 hours ago, pengbuzz said:

Okay, last shots for the Macross Factory in 1/72:

100_1074.JPG.87f7936c85395c6aaff24d812f5b2d87.JPG 100_1075.JPG.e816adf28212577e039ad0dadae79dca.JPG 100_1076.JPG.a33c645616196a609ba294e918ebe39e.JPG100_1081.JPG

100_1082.JPG.f58ac045642d8eccf32f3ca69130de6d.JPG 100_1079.JPG.b526bd3c6e88759af7672579a7a162ed.JPG

The buggy is the last of he vehicles; aside from maybe some more figures and some human-scale equipment (such as welders, air tank carts, coffee cups, etc), I think this is it for this one!

(unless I get another idea, like "sumo" armor for the 1J... )

Real nice looking factory Peng. Great work!

 

On 7/11/2020 at 11:51 AM, derex3592 said:

Buzz Lightyear To The Rescue!!! Good fun little kit. The wings are spring loaded and work great with a push of the big red button on his chest. The winglets then pull out and lock into place. 

20200711_104630.jpg

And some real nice work on Buzz. Makes we want to watch Toy Story again!

Link to comment
Share on other sites

12 hours ago, derex3592 said:

Some not very glamours but necessary amateur hour going on over here as well today getting the wires into the wood and up the brass rod for the Star Destroyer base.....not easy. 

20200712_102439.jpg

20200712_103622.jpg

NIIIIIIIIICEEEEE!!!!!

Link to comment
Share on other sites

My apologies, but one of my posts didn't get posted.

Peter - As I posted in your main thread, the base looks great! Keeping it as is focuses on the valks. Adding details, weathering and color to the base will incorporate it into the whole scene. I guess it's what end product you want out of it.

Pengbuzz - The factory looks awesome! The detail and colors make it pop and stand out. I always wanted to do something like that, but moving all the time for the military made it impossible. I have the kit from decades ago and never fully assembled it. Congrats on a great project!

Derex - Your base will make your project a great display piece!

Thank you guys, still more work to go on the whole turret. I'm spending more work on the darn turret than the whole ship put together! -MT

Link to comment
Share on other sites

I want to post an update but I hate when it is the bottom of the page and then promptly gets lost or overlooked when the new page forms. Come on page...roll over! Lol

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...