Jump to content

Whats Lying on your Workbench MK IV


Urashiman

Recommended Posts

Fairly proud of how this one came out, took the advice of @electric indigo and went over the whole model with a very white light grey mix sprayed very lightly to kind of tone everything down a bit and tie everything together. Followed that up with some Tamiya liquid smoke. I actually got the water slide canopy frame decals down on the clear cockpit on this one. I despise frame only cockpits, my one real complaint about all the Bandai SW kits. Finemolds options were better, as were their battle damaged /already chipped water slide decals. But anywhoo.. Enjoy the pics! 

20190314_144753.jpg

20190314_144713.jpg

20190314_144739.jpg

20190314_145251.jpg

20190314_144801.jpg

20190314_144818.jpg

20190314_144844.jpg

20190314_145011.jpg

Link to comment
Share on other sites

Time for a Star Wars break...now.. I've never built a Hasegawa kit before, and I've heard they can be a bit... different... So... I'm gonna let you guys tell me which to jump into 1st.  I'm kinda leaning towards trying the Raptor.. LOL 

20190315_094300.jpg

Edited by derex3592
Link to comment
Share on other sites

Nyankodevice, Nice to see your finishing up that Sivil figure. I don't know if you have sculpted your own figures before, but it looks great.

Lt. Z0mBe, you've done lots of great scratch detailing and puttying as usual. Nice cockpit too, where id that figure come form?

Electric Indigo, with all the puttying you've done on the F-14 nose cone, I assume the Hasegawa 1/48s are no more easy to build than the 1/72s.

Derex, great work on the B-Wing. It looks fittingly alien. Nice weathering and rust here and there. Why does it have the Japanese rising sun, I wonder? As for the new Hase kits your looking at, treat them as you would a resin kit and you will be fine: lots of parts fitting, sanding, molding and puttying. You have all the skills needed and more, we have seen it. Just don't expect a Bandai snap fit kit. If you know what you are getting into, they are fun, and they come out great. I would follow WMCheng's build guides.

Link to comment
Share on other sites

Those look great! Love the camouflage pattern on the Nazi plane. I picked this up from USA Gundam store online this week for $18 out the door with a 15% off coupon on their eBay store with free shipping and it's here 2 days later! Very detailed little kits. One slight issue. Effing Bandai....ONLY BANDAI would NOT include water slide decals for two of the tiniest SW models they've ever produced. Stickers only. Really Bandai??? REALLY?!!! Guess I'm using them whether I want to or not. Can't mask off stuff this tiny... I don't think. Anyways.. Will be a fun little weekend project sometime. 

20190315_222829.jpg

Edited by derex3592
Link to comment
Share on other sites

More Star Wars fun for you, both kits seem to be super detailed. Your perseverance with the B-Wing really paid off, the weathering looks nice and balanced.

With Hasegawa kits, I recommend checking scalemates for the year the molds were made, as they are reboxing a lot of kits with new decals or part additions. My Tomcat is from the late 80's, it's still a great kit, just not as great as the recent Tamiya version in terms of engineering. But at the time of it's original release, it must have been light years ahead of the competition. And today you can get it for half the price of the Tamiya kit.

Link to comment
Share on other sites

 

Those look great! Love the camouflage pattern on the Nazi plane. I picked this up from USA Gundam store online this week for $18 out the door with a 15% off coupon on their eBay store with free shipping and it's here 2 days later! Very detailed little kits. One slight issue. Effing Bandai....ONLY BANDAI would NOT include water slide decals for two of the tiniest SW models they've ever produced. Stickers only. Really Bandai??? REALLY?!!! Guess I'm using them whether I want to or not. Can't mask off stuff this tiny... I don't think. Anyways.. Will be a fun little weekend project sometime. 

20190315_222829.jpg

How long is that Blockade Runner?  I can understand some of the trends with kits getting smaller, but at the same time, I'm really tired of waiting for a nice display model of that ship.  It's such an iconic design, I can't believe there's never been a decently sized kit of it.  I just want something about 9-12 inches long. 

Guess I'm sticking with the X-Wing tabletop game version displayed on my mantle for the foreseeable future. :p 

 

Link to comment
Share on other sites

 

How long is that Blockade Runner?  I can understand some of the trends with kits getting smaller, but at the same time, I'm really tired of waiting for a nice display model of that ship.  It's such an iconic design, I can't believe there's never been a decently sized kit of it.  I just want something about 9-12 inches long. 

Guess I'm sticking with the X-Wing tabletop game version displayed on my mantle for the foreseeable future. :p 

 

It's no where near that long, prob about 6 inches. I'll post some pics when I build it, prob this coming weekend.  I got bored Sunday and primed/painted and put the Falcon together, gave it a quick acrylic black wash and then started applying the "stickers".  I must eat my own words here a bit..while not waterslides, they really aren't bad at all...very thin and lay down nicely over tiny surface details. Just use a qtip to press them down hard.  I'll post a couple of pics later. The detail on these is truly incredible, you really have to look at them under a magnifying glass to see appreciate it. I do have a nitpick about Bandai's Falcon's though...even the BIG boy.  The cockpit "olive" is too squished and looks odd from the top and sides. FineMolds was a bit more elongated and to my eye looks better. 

20190318_192917.jpg

20190318_192900.jpg

Edited by derex3592
Link to comment
Share on other sites

Damn, it looks like pics from a model show in here, and all from the winning table at that! If I quoted everyone it would be its own page, so great looking builds all around! Wow.

Though, go for the YF-19!

 

Time for a Star Wars break...now.. I've never built a Hasegawa kit before, and I've heard they can be a bit... different... So... I'm gonna let you guys tell me which to jump into 1st.  I'm kinda leaning towards trying the Raptor.. LOL 

20190315_094300.jpg

This is currently on my table. Just finished the base coat of MM light gray after a preshade. Now time for the other colors.

vHhm5lc.jpg

 

 

Link to comment
Share on other sites

 

Recently finished this Academy 1/72 OV 10 A. I added alot of detail to the cockpit

41300461_2626328467592965_5025148999456260096_n.jpg

41176040_2626328580926287_4213072470212608000_n.jpg

41120919_2626328447592967_754392777701195776_n.jpg

41151274_2626328607592951_5875222382813118464_n.jpg

41078172_2626328527592959_3988205347146825728_n.jpg

40943284_2626328554259623_4259397703999422464_n.jpg

Nice build!

Got one of these sitting unbuild in my shelf, but from Revell (really old kit mold from the 90s - means much putty and sanding).

Link to comment
Share on other sites

On 3/20/2019 at 9:31 AM, derex3592 said:

nice! Love the Defiant! I almost pulled the trigger on the reissue of the DS-9 Runabout the other day. 

Not a big runabout fan meself. Defiant though, she is one cool 'little' ship. After a couple more masking/painting sessions. she's coming along.

Oyvgv39.jpg

Link to comment
Share on other sites

4 hours ago, derex3592 said:

Looking good!  Are you going to attempt some LED lighting for the engines? I feel like the Defiant is simple enough where I might actually have a prayer of lighting the engines if I ever built one..

I've never really been into lighting. Besides, the hull is all glued and sanded shut, so too late for that.^_^

Link to comment
Share on other sites

Your Defiant is coming along nicely, good luck with the decals. 

On a sidenote, I wonder how Hasegawa can do pencil-line faint engravings since the mid-80s, while AMT/Round 2/Moebius and their random current chinese contractor seem to use small tractors to plow their panel lines into the kits. It kills all their small-scale SF ships for me.

Link to comment
Share on other sites

3 hours ago, electric indigo said:

Your Defiant is coming along nicely, good luck with the decals. 

On a sidenote, I wonder how Hasegawa can do pencil-line faint engravings since the mid-80s, while AMT/Round 2/Moebius and their random current chinese contractor seem to use small tractors to plow their panel lines into the kits. It kills all their small-scale SF ships for me.

Thanks! I'm staying mostly away from the decals though. I'm going to paint all of the colors on it, and only use the pennants, registry and windows of the decal sheet.

And yes, those panel lines are wide and deep. The one good there is about them is that being so helped with masking the panel borders.

Link to comment
Share on other sites

 

On 3/20/2019 at 2:31 PM, derex3592 said:

nice! Love the Defiant! I almost pulled the trigger on the reissue of the DS-9 Runabout the other day. 

The Runabout is nice and big (you're talking about the 1/72 one, right?), but unfortunately lacks an interior. There's an aftermarket resin kit to fix that, but A) it's expensive and B) the pictures I've seen of the parts don't make it look good (mediocre detail, limited section of the interior, very little parts for the price). So when (or is that "if I ever"?:lol:) I build mine, I'll likely scratch the interior...

Link to comment
Share on other sites

Just dug up these old projects from way back in the day. I sure do miss customizing and casting parts Yamato 1/48 upgrade parts.

In the picture are:

- Double jointed elbows 

- Better articulated wrists

- Repair arms

- Proper knuckle type shoulder joints

- Reworked backplate for arms to get rid of the low slung arms

- Reconfigured backplate and swing mechanisms for legs 

- DYRL thrusters

- Highly detailed Eternal D Hands

- Knee extensions for Gerwalk

- Engine for VF-1

- Battroid Yamato stand adapter

These projects were started about 7 years ago and until recently I came across them.  

Time sure does fly.

Anyone else out there willing to share projects started and remain incomplete from long ago?

B28BEB40-D1F1-4D6F-895B-05031AFF35F0.jpeg

Edited by nightmareB4macross
7
Link to comment
Share on other sites

12 hours ago, nightmareB4macross said:

Anyone else out there willing to share projects started and remain incomplete from long ago?

Haha ..ya. One of mine ended up on the auction block..1/48 VF-1A/D conversion from many years back..large.0CA801F8-6C10-4A2A-9F95-93608A31F7B3.jpeg.e9dcab4cf65475b6f3ae9e60f2346cdf.jpeglarge.B0C11B4A-9584-4EA9-AD05-B055AA84BC41.jpeg.c44d01257419262e99844001d391fa2a.jpeg

Link to comment
Share on other sites

Some Cat notes: 

Diverging from the instructions, I recommend glueing the front extensions to the body before installing the intakes, as there's a nasty seam to putty which would lie inside the intakes later.

32411314147_da619bf895_z.jpg

I replaced the tiny actuators for the intake ramps with styrene pieces so I can easily drop them into place after the painting process.

32411314867_acbe1808f1_z.jpg

Link to comment
Share on other sites

Major construction is nearing completion. I recommend glueing only sections of the larger parts at a time to assure good alignment.

The holes for the horizontal stabilizers were to wide, so I glued a piece of plastic sheet inside the hull and drilled an appropriate hole.

40522605423_22d2347605_z.jpg

The front extensions need to be blend in. The parts provide a nice sharp edge.

32546653367_6f50b9ddbf_z.jpg

While the part fit is excellent in some areas, others are a mess. Polyester putty to the rescue.

40522605583_b39ab932e3_z.jpg

Fortunately there's no critical detail to re-scribe in this area. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...