1793 replies to this topic

[Black Valkyrie]

May be Bandai might release it as a Tamashii Exclusive.

[Kurisama]

The YF-19 with '25 style boosters would have said boosters on the hips in Battroid... would look pretty sweet actually. Judging from the movie (frame by frame ) it seems to have reinforced shoulder joints too.

[twich]

So do we have any new information for the release of the Yamato VF-19F/P variants? Have they been shelved? Thanks
Twich

[Reïvaj]

So do we have any new information for the release of the Yamato VF-19F/P variants? Have they been shelved? Thanks
Twich

No, but Yamato’s been advised to delay all the Macross7 related releases till the end of the year.

[Pierre]

I am so going to customize the p but i figured we wont see them till 2013

[valid]

i dare to bet that bandai will made the customize vf 19 in the frontier show....hahahha

[Pierre]

With the 19 being so popular they are losing out on money if they don't

[Scream Man]

Hey guys i could use some help

so i got my Blazer today, and while transforming him, the leg got stuck, behind the intake near the wingroot. I couldnt get it to click down for GERWALk. i applied some force, and felt a pop; The pegs holding the wingroot had popped!

Long story short, i dismantled the legd and got the wing root fixed, BUT, there is a piec i cant identify the position of. I think its the piece that makes the leg joint click. before i disassemble the OTHER leg in an attempt to figure out where it foes, has anyone else ever dismantled this joint, and if so where dos this small black piece go?

thanks!

[Pierre]

When you expand the gerwalk joint near the wing root joint on the lower half of the upper thigh i see a black peice there if you see a cavity on your's thats where it goes i think if you remove the screw on the inside of the upper thigh you will get to the area to reinstall the part

[Scream Man]

Ah I think I got it! Looks like it's fixed now. Phew! That was a relief!

Well other than that, good toy!

[Reïvaj]

Hey guys i could use some help

so i got my Blazer today, and while transforming him, the leg got stuck, behind the intake near the wingroot. I couldnt get it to click down for GERWALk. i applied some force, and felt a pop; The pegs holding the wingroot had popped!

Long story short, i dismantled the legd and got the wing root fixed, BUT, there is a piec i cant identify the position of. I think its the piece that makes the leg joint click. before i disassemble the OTHER leg in an attempt to figure out where it foes, has anyone else ever dismantled this joint, and if so where dos this small black piece go?

thanks!

These videos by Yamato’s Mr K. have proven to be very useful. Pay special attention to #3.

#1

#2
http://www.youtube.c...n&v=B4PwhDXy9ho
#3

Edited by Reïvaj, 05 April 2012 - 12:15 PM.

[Archer]

Gah, those videos make me regret selling off my -19, but it couldn't be helped!

[M'Kyuun]

Got my Blazer from HLJ on Monday. It's amazing...gorgeous, tight, and heftier than most Yamato valks due to the die-cast. Had to transform my YF-19 to compare. The YF-19 is still a sweet design, but the VF-19 is an improvement in every way. No regrets.

One thing I did notice, however, is that, in fighter mode, the gunpod lifts the nose tires off the ground just a little bit. Anyone else have this issue?

[IXTL]

One thing I did notice, however, is that, in fighter mode, the gunpod lifts the nose tires off the ground just a little bit. Anyone else have this issue?

Did you compress the handguard (front underside) of the gunpod? Doing so gives the gunpod sufficient clearance off the ground in fighter mode.

Edited by IXTL, 05 April 2012 - 09:15 PM.

[Chronocidal]

It does help, but I wish it compressed even further, because unlike the Fire Valk, the VF-19's gun winds up pointing down pretty far in fighter mode. It's just because the crotch plate is so big sadly, and you really can't do anything about that without messing up battroid.

[Pierre]

Argh just spent the money i was saving on the 19p for a max 22 for 150 shipped and a vf-1a cf with 6 of the series 1 blind figures for 145 shipped man this hobby is expensive

[kamadoma]

^ well I am also waiting for a 19P but I busted my money on other toys that I collect. I think we're still pretty safe since it hasn't been announced yet. Besides, it seems you got yourself a nice big loot.

[twich]

I wonder that when they finally do release the VF-19P will they give it the GU-15 gunpod?
Twich

[Pierre]

I hope so most resources say it has a gu-15 i wish it would come with a normal Pilot to

[Pierre]

Happy with my latest arrival(kai). I think im going to put canards on my 19f when i get it
http://m.flickr.com/...N05/7077666549/

Edited by Pierre, 15 April 2012 - 06:00 AM.

[Archer]

I wonder when that hinted v.3 YF-19 will be announced. I had an inner hope that since they aren't doing Macross 7 stuff till near the end of the year, they would announce the v.3 YF-19 since it is a Macross Plus project.

But since they have a VF-4 in the run to design, I guess it does make sense that they wouldn't start a brand new project...

[Shaorin]

These videos by Yamato’s Mr K. have proven to be very useful. Pay special attention to #3.

#1

#2
http://www.youtube.c...n&v=B4PwhDXy9ho
#3

AAUUUGGHHH!!

even a Valk design that i CANNOT STAND, and was oh-so-happy to have left behind in the 90's, has been rendered SO incredibly beautifully here
that i cannot seem to help but WANT one SO badly. i've actually had -DREAMS- about getting one of these. seriously. i S$%t you not, not in the slightest little bit.

why-oh-why the hell does this damned thing have to be SO damned EXPENSIVE?!?

i don't know, perhaps this is linked to the fact that the old BANDAI 1/65 19kai toy WAS INDEED my VERY FIRST EVER MACROSS toy,
let alone my very first ever TRANSFORMABLE one. i still have that fugly POS packed away, too. it had received a LOT of love
in the time since i had bought it at a comic shop back around 1997-ish, and it's warn-out joints of today are consummate proof of that.

i dunno, the kai DOES go WAY back with me, perhaps i owe it to myself to concentrate on procuring myself
one of these wonderful Yammie 1/60's. if only i could find one at a halfway reasonable price,
and if only i could manage to begin stockpiling a halfway decent chunk of change one of these odd money-hungry months...

Edited by Shaorin, 15 April 2012 - 08:47 AM.

[Mommar]

AAUUUGGHHH!!

even a Valk design that i CANNOT STAND, and was oh-so-happy to have left behind in the 90's, has been rendered SO incredibly beautifully here
that i cannot seem to help but WANT one SO badly. i've actually had -DREAMS- about getting one of these. seriously. i S$%t you not, not in the slightest little bit.

why-oh-why the hell does this damned thing have to be SO damned EXPENSIVE?!?

i don't know, perhaps this is linked to the fact that the old BANDAI 1/65 19kai toy WAS INDEED my VERY FIRST EVER MACROSS toy,
let alone my very first ever TRANSFORMABLE one. i still have that fugly POS packed away, too. it had received a LOT of love
in the time since i had bought it at a comic shop back around 1997-ish, and it's warn-out joints of today are consummate proof of that.

i dunno, the kai DOES go WAY back with me, perhaps i owe it to myself to concentrate on procuring myself
one of these wonderful Yammie 1/60's. if only i could find one at a halfway reasonable price,
and if only i could manage to begin stockpiling a halfway decent chunk of change one of these odd money-hungry months...

You know you could always go for the 19S/F... and if you aren't a fan of the stubby wings the P. That way you get the awesome engineering without all of that red.

[UN Spacy]

Expensive? The Kai can be easily found for 13,000 to 14,000 yen if you know where to look.

[Reïvaj]

Expensive? The Kai can be easily found for 13,000 to 14,000 yen if you know where to look.

This is the cheapest still available one I could find around:

http://www.hkcollect...sara-nekki.html

Any advise?

[Chronocidal]

Ah, they've got the VF-19S on sale as well, kind of tempted to get a second one to customize. Also, looks like Gamlin's VF-22 is really cheap right now.

[Swoosh]

In last Dec, I got my VF-11B and M&M VF-22 for HKD698 each in a local shop, all 11B gone in an hour, but all VF-22 are still around the same price recently, VF-19 are around HKD1300-1400.

[Pierre]

I was wondering how many members were planning. On getting the vf-19p just to customize it

[Chronocidal]

Sad part is, I don't even want to customize a P.. I want a custom F model.

[Pierre]

What are you planning to do to your 19f

[Kurisama]

I'm totes going to skull squadron my VF-19P.

[Chronocidal]

See, I really want to make a white VF-19F with black stripes, similar to the master file scheme. I think it's just beautiful.

The VF-19P is going to be white-ish, so it's a good start, but there's a significant number of parts I'd have to swap out for an F model. The wings/wing gloves, shoulders, hip flaps, head, leg panels (though I actually like the YF-19 style strakes), and canard panel would all need to be replaced with pieces from an F, and that's a lot of blue plastic to paint white, even if I did want to buy a spare VF-19F just to kitbash, and I really don't want to spend that much.

I really wish they'd just release an unpainted kit of the VF-19F/S, but given the complexity of this VF-19 design, I get the feeling that will never happen.

[Kurisama]

Best of luck to you if u manage to score the 19F (or 2!) - painting that much of the valkyrie in such a contrast to the original plastic - makes me break into a cold sweat. But yeah, that colour scheme is sexaaaaay.

[Pierre]

Especially painting plastic with such a high gloss to it. Im going to take apart the 19p and give it a clear flat coat of paint before i change anything but that would be awesome scheme. After doing the p and f yamato really should consider releasing a master file vf-19f.

[Scream Man]

Im resurrecting this, because one should never stop talking about the 19's.

Also now having the Master file, i would buy almost all of those paint schemes, especially a Skull Squadron, that cool Black/Gold lightning one, and the White/Red Cheyenne one.