captain america

Captain's log: Thurday, April 25, 2024. Work on the 1/48 TANKU-ROBO has begun and is off to an excellent start. I had actually done some drafting a couple of months ago on my private time, just to see if there were any irreconcilable geometry problems. My biggest concern was for the Sniping Clapper mode, hereafter Transport mode because many renderings had an absurdly thick and clumsy profile: nowhere near the more flat and uniform appearance we see in the animation. Either there was a significant problem in the fundamental geometry, or these guys weren't trying very hard. I'm happy to tell you it's the latter, but with a caveat. I was able to get a flatter profile because I opted to incorporate collapsing panels in strategic areas. That is to say, certain modules are hinged and can be made more compact in certain modes. This is actually quite feasible in a toy like the old Matchbox Hovertank because it's large and offers more breathing room for screws, joint reinforcements, etc. In 1/48 scale, the geometry is still sound, but due to the smaller size, sturdiness and playability would be greatly sacrificed: bad news for toy designers, but not a factor for a display model! As you can see in images 1-4, I was able to get Transport mode very flat and elegant without sacrificing the other modes, and without cheating! 004.HEIC003.HEIC002.HEIC001.HEIC With the drafting process now largely done, I can begin proper construction. Pic 05 shows the basics: a pile of modelling board chunks, some analog calipers, a ruler, and of course the plots. 005.HEIC Pic 06: I need to cut some of the modelling board into more manageable pieces, so under the band saw it goes. 006.HEIC Pic 07: with every cut of the band saw comes a rough, uneven texture left by the blade, so those pieces are then milled flat. 07.HEIC Pic 08: in order to achieve precise results, precision must be maintained at every step of the construction process. If I allowed deviation to occur at this early stage, the end result would be a sloppy, irregular mess! 008.HEIC Pic 09: now that I have a few decent blocks to work with, I begin the tedious process of cutting out my paper patterns, which will guide my construction. 009.HEIC Pic 10: as a bonus, I thought I'd show you some of the cutting tools I use on the milling machine. On the far left is the faced-end mill: I use this for creating flats over larger surfaces. It does the same work as a regular mill shank (second-from-the-left) but does it much quicker. Then comes a large bull-nose cutter. The many cutting edges denote this to be used for fine cutting. It differs from the smaller bull-nose flute in that despite being small, it has fewer knife edges, meaning it can remove more material more quickly. The last two are smaller, square end cutters which I use for detailing. Sometimes removing too much excess material can cause a part to crack, so these are used for fine work in sensitive areas. 010.HEIC Pic 11: with certain blocks which are too thin and awkward to hold in the milling vise, I use my trusty drill press with a sharpening stone as an improvised end-mill. When using this method, I usually only have to remove a millimeter or less, and it does so very effectively, with the drawback being lots of fine dust. 011.HEIC That covers the progress for this week. Things should start getting more interesting in the next update, when you'll start to see some (almost) recognizable shapes, so stay tuned!

Hey Ted. My intention was to make the Sergeant head as the alternate. This way, if someone wants the Private model, they can simply remove the crest and putty over the ear flaps.

Hey guys! I've been hard at work drafting the diagrams for TANKU-ROBO, and it's going well--VERY well! Because this is a quasi-transformable mecha, it obviously poses some extra engineering challenges, but that only makes it more interesting. I have overcome most of the hurdles and will have a proper update next week. In the meantime, I have a request: can anyone take this file and print it out for me in 1/48 scale? It needs to be: -ultra-fine resolution -1/48 scale (can specify max dimensions for you) -no display base required If you have a printer and are so inclined, send me a private message with your fees and timetable, thank you! The file in question: https://cults3d.com/en/3d-model/various/asiento-y-piloto-de-spartan-hovertank-robotech

The 1/48 TANKU-ROBO project is going ahead.

2 spots remain open for the first 30. Orders 31 and up will see the price changed to $415 CAD + shipping. The first run of 30 is locked-up.

Sadly, no. Australian import fees made the distribution for my kits untenable.

MIND: BLOWN! Demand for the 1/48 TANKU-ROBO has exceeded the first run in just 48 hours! Payment requests are sent out to all those whose email is on file. The speed at which you respond to the payment request will determine whether you end up in the First 30 group, or the >30 group.

Whoa! 20 in the first day!! Keep it up, guys!

A happy belated Easter to you all, and I hope you had the opportunity to get some much-needed R&R. As some of you may know, 2024 marks the 20th anniversary of Moscato Hobby Models! To celebrate this milestone, I would like to propose the next original build project for your consideration in 1/48 scale, I call it TANKU-ROBO (AKA SOUTHERN CROSS SPARTAS/Veritech Hovertank). The kit would have the following features: -built in accordance with original, primary visual source material -integrated (free-pose) ball-joint system -aftermarket round hands included -two different head options -may be built in any one of three modes (not directly transformable!) -pilot figure included In order for this project to go ahead, I need a minimum of 30 orders, non-negotiable. Please read the following carefully. If you are interested in getting this model, send me a PRIVATE message. Posting in the comments will NOT be construed as interest. Kit price for the first thirty: $390 Canadian dollars Kit price > 30: $415 Canadian dollars Shipping will be calculated and collected once the kits are closer to completion. There will be a standard shipping price for the US and Canada, while international shipping will be calculated based on destination and order size. You have until April 19th (inclusive) to place your order. If I fail to get the requisite orders by that date, I will simply refund everyone and move to another project—this is a one time offer! With regards to shipping: I will try to give you at least a one-week heads up before I collect, and a 2 week grace period to allow you to make payment. If you fail to make your shipping payment within the allotted time, your kit payment will be refunded. If you then decide to re-order, you will be charged the >30 price along with shipping. Go!!

I'm just going to leave this here.

While we're on this topic, does anyone have a 3DS or OBJ file for a seated Jeanne Francaix pilot, preferable already in 1/48 scale? This project, if it does proceed, will need a seated pilot figure.

Did you know that 2024 marks not only the 20th anniversary of Moscato Hobby Models, but also coincides with the 40th anniversary of Southern Cross? I wonder what this could possibly mean.

Based on my own findings, the newer batches of TASK 3 high strength polymer seems to stabilize more quickly than it did when I originally issued the Graug. I don't think post-curing is necessary at this rate, and especially if you don't have an oven, I think it would be wiser to omit that step rather than do something which could cause damage. You are also correct in your assessment that fewer parts are cast in polymer for this re-issue. An extra 12 years of experience with various resins helps! My comments in blue.

While supplies last.

They could always make TGIII into a prequel. Cruise can play Pete Mitchell's dad and explore his Phantom exploits with Viper over Vietnam and his final, heroic mission. The final scene of the movie could show the brand-spanking new F-14s being delivered to the navy. Epic win.