Jump to content

Queadluun Rau Yamato


Robowang

Recommended Posts

Sweet holy crap! I have never owned one of these until today...I got the DYRL Milia 639 red Queadluun Rau mecha and OH MY GOSH this thing is one of the coolest toys I have ever owned. I had no idea the figure included was the same size as the CMS figures, nor that the whole thing was this BIG.

So is this why the CMS Zentraedi outfit Max figure is leaning back in that pose a little bit? Does he actually fit in the blue version of this mecha? Or does that one come with a Max figure?

Now I just gotta find a Bandai 1/55 DYRL Valkyrie in Max colors to go up against this baby!

Also, it looks really nice on display with the old Matchbox Robotech Battlepod and Officer Pod.

Link to comment
Share on other sites

So is this "Queadluun Rehr/Rare" thing I see on ebay just the same toy with a new "face" or is it something different? From what I can tell, there's some Klang Klang girl who uses it in Macross Frontier? I've never seen it, but I'm curious about the toy.

Edited by Robowang
Link to comment
Share on other sites

there's the old Yamato Q-Rau discussed here, it was made in the late 90's I think after the v1 Vf-1 I think, based on DYRL.

There's the non scale Bandai modified Q-Rau used by Klan-klan in Macross Frontier made recently.

sithlord, that's a beautil M&M shrine...you're just missing their 1J's and virgin road.

Link to comment
Share on other sites

At a glance the original DYRL Rau and Plan's Rhea look quite similar. But you'll find - apart from the obvious difference of impact cannon, duel canisters, face and forearm cannons - most of the main body parts and backpack are different. Lots of little greebles like cameras, thruster nozzles & vents. Trust me, I've studied the design a lot... :D

I should add its designed for a more aggressive stance and silhouette as well as far more articulation & flexibility.

Edited by Kurisama
Link to comment
Share on other sites

Thanks for the info!

Also, I'm sad, because the cockpit doesn't actually close over the Max figure. I took off his boots and positioned his arms, and he looks great sitting in there (minus it being Millia's) but because of his shoulder pads, the two side pieces don't close all the way. I guess that saves me $100+ for not having to buy the Max suit.

Damn, Macross is expensive.

On that note, at least I have a thing for the old Bandai Valkyrie mold. Those seems to be a bit cheaper than those removable leg Yamato things that I don't like.

Are any companies ever going to make Valkyries again, or is that pretty much over for good?

Link to comment
Share on other sites

Thanks for the info!

Also, I'm sad, because the cockpit doesn't actually close over the Max figure. I took off his boots and positioned his arms, and he looks great sitting in there (minus it being Millia's) but because of his shoulder pads, the two side pieces don't close all the way. I guess that saves me $100+ for not having to buy the Max suit.

Damn, Macross is expensive.

On that note, at least I have a thing for the old Bandai Valkyrie mold. Those seems to be a bit cheaper than those removable leg Yamato things that I don't like.

Are any companies ever going to make Valkyries again, or is that pretty much over for good?

there is a WHOLE world of valkyries now!! get thee to anymoon.com to read up on them! yamato's valks havent needed to remove the legs in a VERY long time...like a decade or so. I think you will love the current (2008 to current) yamato "v2" 1/60's (yamato is now arcadia so the current releases and thus upcoming are now branded arcadia), or the older (early to mid naughts) 1/48 scale valks.

Link to comment
Share on other sites

there's the old Yamato Q-Rau discussed here, it was made in the late 90's I think after the v1 Vf-1 I think, based on DYRL.

There's the non scale Bandai modified Q-Rau used by Klan-klan in Macross Frontier made recently.

sithlord, that's a beautil M&M shrine...you're just missing their 1J's and virgin road.

mid 2000's. Late 90's we had NADA! 1/55s were still an arm and a leg.

Check this thread for release dates... http://www.macrossworld.com/mwf/index.php?showtopic=29393

Link to comment
Share on other sites

Hmmm. Still liking the old Bandai's better. Maybe it's a nostalgia thing :)

Really, though, any big versions of the Hikaru Strike Valkyrie VF-1S would be amazing. The only Yamato version of that seems to sell for well over $500, and that's just NUTS.

Good to know that this Arcadia thing I keep hearing about is actually the Yamato company, though. I thought it was just that garish looking forward-swept wing Valkyrie I keep seeing pictures of. Thought that was called the Arcadia or something.

Can you tell I haven't watched any of the more recent Macross series? :)

Link to comment
Share on other sites

Good to know that this Arcadia thing I keep hearing about is actually the Yamato company, though. I thought it was just that garish looking forward-swept wing Valkyrie I keep seeing pictures of. Thought that was called the Arcadia or something.

Can you tell I haven't watched any of the more recent Macross series? :)

But the "forward-swept wing Valkyrie", actually called the YF-19, is from Macross Plus, which was released in 1994. So it's not very recent at all... Can't blame you though; the original show is and will probably always be the best. However, Macross Plus is generally considered one of the best sequels, so you should give it a try. The same goes for the toys!

Link to comment
Share on other sites

But the "forward-swept wing Valkyrie", actually called the YF-19, is from Macross Plus, which was released in 1994. So it's not very recent at all... Can't blame you though; the original show is and will probably always be the best. However, Macross Plus is generally considered one of the best sequels, so you should give it a try. The same goes for the toys!

Oh, I knew about that one, but I have such a crappy eye for detail that I just assumed it was something different. I can barely tell the difference between a Macross Plus white Valkyrie, a Macross II white Valkyrie, a Flashback Valkyrie, and all this stuff from Frontier. Maybe It's the colors, because even without having watched it, I can identify a Fire Valkyrie :)

FYI, I have seen Original, DYRL, II, Plus, and Zero (which I didn't really enjoy, but hey) but I haven't seen 7, 7 movies, Frontier, or Frontier movies. So pretty much anything subtitles that's more then a few episodes :)

And of course I have NOTHING against any of those series. I'm just one of those OG guys :)

Link to comment
Share on other sites

I think Yamato failed by making the Q's in colors of literally one screen shot in DYRL.

IMO, they would have sold better being in Zen Green.

People would have army built them.

I do agree that I would have preferred the Green Q-Rau but Millia's Qrau has a ton of screen time in DYRL. And Max's Blue verision was in more than one shot and played a major role in the final fight. I think it's been said a couple of times that DYRL is more popular in Japan but to me the regular Q-Rau was an army builder and Millia's white and green power suit would have been a great follow up/recolor. In any case they should have sold a similarly sized Regult first. It's a mistake to lead off with the power armors.

Link to comment
Share on other sites

Dang it, I just got a VF-1A DYRL Max with Super Strike, so a QRau would make for an interesting 'love at first sight' combo. Sadly, neither are in their proper respective colors or variations, (VF-1A TV-Max and Green-white Q-Rau for TV version; the VF-1S for the DYRL version). (edit... it's a 1S, not a 1J... I miscounted the number of antenna :D)

Edited by bhchan
Link to comment
Share on other sites

Man, if someone could make a custom head and feet, the Matchbox Robotech male power Armor could be a pretty decent DYRL Nousjadeul Ger. Just add paint! Kinda tempting.

There's an amazing 1/100 version from some toy show a couple years ago, but it seems to be selling for $400. That's a little nuts.

How big is 1/144, anyway? Like a couple inches tall?

Link to comment
Share on other sites

Yes, that little project should be very interesting!

I have a number of large projects on my list, VF-11 armour, Renegade Power armour and DYRL Nousjaduel among them. I made the 1/60 Impact cannon, as a test to gauge scale and if I could make a bona fide 'new' stand alone piece. Trust me, I want a 1/60 power armour to go with my VF-11Bs and DYRL VFs as much as u guys :D you just need to be patience.

Link to comment
Share on other sites

I got about halfway through carving a new pair of legs for the matchbox N-Ger. Then I had to start packing for our move. I've also considered modding a 12" robot toy into a renegade suit. And order some of Kurisama's Q-rau kit.

Now I currently have no hobby zone & a 6-week old boy. Sigh, some day...

Link to comment
Share on other sites

Yes, that little project should be very interesting!

I have a number of large projects on my list, VF-11 armour, Renegade Power armour and DYRL Nousjaduel among them. I made the 1/60 Impact cannon, as a test to gauge scale and if I could make a bona fide 'new' stand alone piece. Trust me, I want a 1/60 power armour to go with my VF-11Bs and DYRL VFs as much as u guys :D you just need to be patience.

I'd love to see your take on the renegade power armour. If you make one, you should also make a variant that allows you to stick a VF-11B gunpod bayonet into ;)

Link to comment
Share on other sites

Great idea! They way I've planned out out is to have the main components interchangeable between the TV, DYRL Ger and the Renegade - so you can potentially make your own Zentran poorest armour . I won't sacrifice accuracy or functionality for that tho. At the very leastmake the DYRL Ger new able to sport the TV and renegade had unit and one of the impact cannons from the TV, DYRL or Frontier.

Link to comment
Share on other sites

This Rau was done before Kurisama had his kits out - otherwise I would have grabbed them right quick...

Great paint job & picture! Maybe it's just me but that secret project looks like it has a shadow!!! (Fyana-base?)

I have a number of large projects on my list, VF-11 armour, Renegade Power armour and DYRL Nousjaduel among them. I made the 1/60 Impact cannon, as a test to gauge scale and if I could make a bona fide 'new' stand alone piece. Trust me, I want a 1/60 power armour to go with my VF-11Bs and DYRL VFs as much as u guys :D you just need to be patience.

!!! Resin recasts of the finished prints for lower cost points, please. :)

I got about halfway through carving a new pair of legs for the matchbox N-Ger. Then I had to start packing for our move. I've also considered modding a 12" robot toy into a renegade suit. And order some of Kurisama's Q-rau kit.

Cool! Looking forward to everyone's Zentradi/Meltrandi mechs. I need to get working on my list too!

Link to comment
Share on other sites

Great paint job & picture! Maybe it's just me but that secret project looks like it has a shadow!!! (Fyana-base?)

!!! Resin recasts of the finished prints for lower cost points, please. :)

Cool! Looking forward to everyone's Zentradi/Meltrandi mechs. I need to get working on my list too!

Edited by DarrinG
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...