w8kbrder Posted April 28, 2015 Share Posted April 28, 2015 So if Arcadia were to re-issue a particular valk and were looking for fan feedback, what improvements would recommend? Yamato 1/60 YF-21 Should this valk ever get re-issued by Arcadia, here are a few issues I'll mention that need improving.... -Rear landing gear need to lock. -Landing gear bay doors need to stay open rather than flap around. There also needs to be slot for your fingernail to open them! -Exhaust trim tabs are way too lose. -Fold down wings should be snugged up. Feels like these are way too lose. -Legs need to provide a bit better support. Quote Link to comment Share on other sites More sharing options...
EXO Posted April 28, 2015 Share Posted April 28, 2015 More tampo. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 28, 2015 Share Posted April 28, 2015 (edited) So if Arcadia were to re-issue a particular valk and were looking for fan feedback, what improvements would recommend? Yamato 1/60 YF-21 Should this valk ever get re-issued by Arcadia, here are a few issues I'll mention that need improving.... -Rear landing gear need to lock. -Landing gear bay doors need to stay open rather than flap around. There also needs to be slot for your fingernail to open them! -Exhaust trim tabs are way too lose. -Fold down wings should be snugged up. Feels like these are way too lose. -Legs need to provide a bit better support. These are good points. I would add that they should either revise or remove delimiter mode. My Gamlin's legs come off when rotating out of fighter mode. I never display it in delimiter (does anyone?). It is neat they have it, but like the 19's highspeed mode I think the compromise isn't worth it. I think the look of 21/22 fighter mode is as near perfect as it can get and still be transformable. I would be ok with a fatter belly if it meant better legs, and possibly gunpod storage. More tampo. More tampo would be welcome. It'd be great to see arcadia push more tampo on their $300ish figures. Edited April 28, 2015 by ChaoticYeti Quote Link to comment Share on other sites More sharing options...
Ignacio Ocamica Posted April 28, 2015 Share Posted April 28, 2015 My Gamlin's legs come off when rotating out of fighter mode. I never display it in delimiter (does anyone?). I do First I had Guld's YF-21 in delimiter mode now I have Gamlin's VF-22. Quote Link to comment Share on other sites More sharing options...
treatment Posted April 28, 2015 Share Posted April 28, 2015 So if Arcadia were to re-issue a particular valk and were looking for fan feedback, what improvements would recommend? don't re-color smaller box/packaging with stands msrp under 8000yen Quote Link to comment Share on other sites More sharing options...
snkardo Posted April 28, 2015 Share Posted April 28, 2015 Hola. Yo les pedirÃa que produzcan: - El VF-1D Hikaru Ichijo de escala 1/48 con las accesorios adicionales que se hicieron para el VF-1D 1/60 de Yamato. - Manos (hands) versión TV para escala 1/48 para venderlas por separado. - El VF-1D Max Miria Just Married a escala 1/48 Quote Link to comment Share on other sites More sharing options...
Sandman Posted April 28, 2015 Share Posted April 28, 2015 Change the way the Vf-11's heat shield works. Haven't ever been able to to close it. Quote Link to comment Share on other sites More sharing options...
3D-Brainx Posted April 28, 2015 Share Posted April 28, 2015 More tampo. +1 Or at least water slide decals Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 28, 2015 Share Posted April 28, 2015 Hola. Yo les pedirÃa que produzcan: - El VF-1D Hikaru Ichijo de escala 1/48 con las accesorios adicionales que se hicieron para el VF-1D 1/60 de Yamato. - Manos (hands) versión TV para escala 1/48 para venderlas por separado. - El VF-1D Max Miria Just Married a escala 1/48 Puede haber gente en este foro que no saben lo que está diciendo . Por favor, intente y publicamos en Inglés , por lo que podemos escuchar sus adiciones a las discusiones . Quote Link to comment Share on other sites More sharing options...
Kyp Durron Posted April 28, 2015 Share Posted April 28, 2015 More tampo. This. Quote Link to comment Share on other sites More sharing options...
spanner Posted April 28, 2015 Share Posted April 28, 2015 msrp under 8000yen hehe! yeah right! It would be nice to see some things fixed up on several Valks, but then we'd get another whole bunch of 'evolution' toys with the additional costs of re-engineering applied to them resulting in much higher msrp.. maybe the odd Valk with a few things fixed for example the 21/22 as mentioned by w8kbrder. I'd happily see the delimiter mode binned in favor of better overall sculpt & functionality. But would I be keen on forking out the cash replacing my 3x 22 & Guld 21..? im not so sure. I'd be more willing to have re-engineered SV-51 toys or even something else we don't have yet released! VF3000/5000, VF9, VF14 etc etc. I would have been happy to just see more re-issues and re-paints of existing Valks to be honest. Although a certain very pricey few I now already have so that defeats the purpose for me. I'd still like another VF-4 though! Quote Link to comment Share on other sites More sharing options...
Scyla Posted April 28, 2015 Share Posted April 28, 2015 I don't know. Just reissue the VF-11C and VF-4. Both of them where pretty much perfect. Quote Link to comment Share on other sites More sharing options...
wm cheng Posted April 28, 2015 Share Posted April 28, 2015 TAMPO!!! x1,000,000% Quote Link to comment Share on other sites More sharing options...
spanner Posted April 28, 2015 Share Posted April 28, 2015 I don't know. Just reissue the VF-11C and VF-4. Both of them where pretty much perfect. yes! TAMPO!!! x1,000,000% And yes! Quote Link to comment Share on other sites More sharing options...
Scyla Posted April 28, 2015 Share Posted April 28, 2015 TAMPO!!! x1,000,000% I don't know about that. Maybe for you it is different because you sticker all your Valkyries but for me I have all my Yamato/Arcadia releases and the look uniform with the minimal tampo-printing. So having a VF-0D with minimal deco out of the box vs a VF-0S would look odd to me. I agree that Arcadia should at least put all the markings shown in the anime onto their toys. The VF-17 is the worst offender imho. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 28, 2015 Share Posted April 28, 2015 It will be interesting to see the 19 advance next to my Arcadia. The bandai one is gonna have about 3 valks worth of tampo on it. Quote Link to comment Share on other sites More sharing options...
raptormesh Posted April 28, 2015 Share Posted April 28, 2015 All those 21 improvements are kinda minor, and won't be enough for me to repurchase them. I would prefer if they focus on the sv-51 or the heatshield on the 11 as that is actually annoying enough. Remember guys the key to getting your 21 to stand in battroid is rough surfaces with locked ankles. It's still the most amazing mass shifting illusion valk I have and only one where it stumped my non macross friends how it actually transforms. With other valks they can visually identify the legs in fighter modes and go from there for example. Don't even get me started on frontier backpack wings. Quote Link to comment Share on other sites More sharing options...
ChaoticYeti Posted April 28, 2015 Share Posted April 28, 2015 All those 21 improvements are kinda minor, and won't be enough for me to repurchase them. I would prefer if they focus on the sv-51 or the heatshield on the 11 as that is actually annoying enough. Remember guys the key to getting your 21 to stand in battroid is rough surfaces with locked ankles. It's still the most amazing mass shifting illusion valk I have and only one where it stumped my non macross friends how it actually transforms. With other valks they can visually identify the legs in fighter modes and go from there for example. Don't even get me started on frontier backpack wings. I would purchase a revamped 51. Proportions and such are great. It just needs a second pass and tightening up design-wise. Quote Link to comment Share on other sites More sharing options...
jvmacross Posted April 29, 2015 Share Posted April 29, 2015 My valks have not been released: VF-9 VF-14 M+ ver VF-14 M3 ver VF-11MAXL VF-17T VA-3 D7 ver VF-5000 D7 ver Quote Link to comment Share on other sites More sharing options...
wm cheng Posted April 29, 2015 Share Posted April 29, 2015 Of course I'd like to see a VF-2SS and the VF-5000 from Arcadia or Bandai. Quote Link to comment Share on other sites More sharing options...
arrow Posted April 29, 2015 Share Posted April 29, 2015 stands as standard / standing pilot figure or crew / lower cost with several limited run color variations. or of its just one thing- multiple heads A / J / S Quote Link to comment Share on other sites More sharing options...
spanner Posted April 29, 2015 Share Posted April 29, 2015 Stands are always a welcome addition but at least give them some degree of adjustment for Valk display and posing.. both the standard issue Yamato and Bandai stands are total junk and I'd rather pay a bit less and not have them included. Quote Link to comment Share on other sites More sharing options...
McFly!! Posted April 29, 2015 Share Posted April 29, 2015 I want more details, gimmicks, and lights!!! And dangnamit I want regults and glaugs! Quote Link to comment Share on other sites More sharing options...
spanner Posted April 29, 2015 Share Posted April 29, 2015 hmmm i dunno about lights and such.. would then need batteries and it could get messy.. maybe on a much larger scale figure but not the 1/60. Glow in the dark paint on the other hand is an idea! Lancelot painted a few glow paint details on the custom Valks he did for me and they work great! Regults and Glaugs yes of course but that is for the wish thread i think! Hehe! Quote Link to comment Share on other sites More sharing options...
McFly!! Posted April 29, 2015 Share Posted April 29, 2015 hmmm i dunno about lights and such.. would then need batteries and it could get messy.. maybe on a much larger scale figure but not the 1/60. Glow in the dark paint on the other hand is an idea! Lancelot painted a few glow paint details on the custom Valks he did for me and they work great! Regults and Glaugs yes of course but that is for the wish thread i think! Hehe! Lol yeah, this sounds like our 1:32ish wish list XD Glow in the dark paint on valks? Sounds interesting! Pics/vids please? Quote Link to comment Share on other sites More sharing options...
Dangard Ace Posted April 29, 2015 Share Posted April 29, 2015 Quote Link to comment Share on other sites More sharing options...
Graham Posted April 29, 2015 Share Posted April 29, 2015 1) No ankle ball joints. 2) Cheaper MSRP. 3) More tampo printing. 4) Smaller boxes. 5) Standing pilot and crew figures. Quote Link to comment Share on other sites More sharing options...
McFly!! Posted April 29, 2015 Share Posted April 29, 2015 Lol no capes!!! Quote Link to comment Share on other sites More sharing options...
w8kbrder Posted April 29, 2015 Author Share Posted April 29, 2015 Remember guys the key to getting your 21 to stand in battroid is rough surfaces with locked ankles. It's still the most amazing mass shifting illusion valk I have and only one where it stumped my non macross friends how it actually transforms. With other valks they can visually identify the legs in fighter modes and go from there for example. Don't even get me started on frontier backpack wings. Its a great valk. Now officially my fav Quote Link to comment Share on other sites More sharing options...
aaajin Posted April 29, 2015 Share Posted April 29, 2015 Sv-51 legs. 1) The walls on the legs are too thin/brittle. 2) Someone need to redesign the gerwalk leg joints/pin suports, as they disintegrated pretty easily on mine. 3) Make the legs shorter/slide-in, like the new 19. Quote Link to comment Share on other sites More sharing options...
Valkyrie addict Posted April 29, 2015 Share Posted April 29, 2015 More tampo indeed, the VF-1J CF was a great example of how awesome it would look, don't know why that "experiment" failed. waterslide decals to everything! I would appreciate if Arcadia would release 'fix up kits" like improved YF-19 ankle joints to replace instead of getting a whole new valk. Quote Link to comment Share on other sites More sharing options...
NightCastle Posted April 29, 2015 Share Posted April 29, 2015 (edited) Hey look! Its the "Michael Bay" of Valk photos! Nice pics, though. Edited April 29, 2015 by NightCastle Quote Link to comment Share on other sites More sharing options...
KH355hamdi Posted April 29, 2015 Share Posted April 29, 2015 1. VF-0 pilots need more secure seating. 2. Re-design the way the arm swings out from fighter to GERWALK. 3. Lower the pointy bit on the hip intake to avoid hitting the back of the chest piece. 4. Include a stand. Quote Link to comment Share on other sites More sharing options...
Duymon Posted April 29, 2015 Share Posted April 29, 2015 THE PRICE *runs away* Quote Link to comment Share on other sites More sharing options...
w8kbrder Posted April 29, 2015 Author Share Posted April 29, 2015 Hey look! Its the "Michael Bay" of Valk photos! Nice pics, though. Hah! Yeah thats true. Was messing around on my phone again. Michael "Lens Flare" Bay. Or maybe I'm confusing that with JJ Abram's Star Trek. But the Star Wars trailer teaser looks promising! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.